Minster DAS-60-52 x 32

Listing description

Machine Type: Presses

Year: 1984

Manufacturer: Minster

Model: DAS-60-52 x 32

Control:
Condition: Good

Under Power: Yes

Specifications:
Shut height, outer slide, stroke down, Adj. up on bed: 25"
Shut height, inner slide, stroke down, Adj. up on bed: 27.38"
Thickness of bolster plate: 5"
Area of slide, outer, R-L, F-B: 52" x 32"
Area of slide, inner, R-L, F-B: 28" x 16"
Area of bed, R-L F-B: 52" x 32"
Area of bolster, R-L F-B: 52" x 20"
Angular stroke displacement between the two slides,:
outer slide leads by 25 degrees:
Opening in bed, R-L, F-B: 40" x 12"
Strokes per minute: 100 - 200 SPM
Tonnage capacity of each slide is 30 tons at .25" up:
on stroke, 30 tons maximum on each slide:
Usable energy at 100 spm is 16.5 inch tons:
Diameter of crank shaft at man bearings: 5.5:
Stroke of slide (Outer slide): 3.5"
Stroke of slide (Inner slide): 4:
Adjustment of slide (Outer slide): 1"
Adjustment of slide (Inner slide): 1"
Upright opening: 16"
Size and speed of main drive motor: 40 HP at 1000 rpm
Comments:
This machine never got released to the can production world, it was
purchased new and used to prototype new dies and feed
systems. It has a Minster feed system for 209 blanking forms and the last 209
10 out new die is still in the machine
To blank and draw #209 alum ends - 10 out.
Heavy duty high energy flywheel drive
The frame is of two piece unitized construction
Equipped with Minster Heavy Duty Hydraulic Operated Friction Clutch and Brake
Spring actualted caliper brake also engages if hydraulic pressure is lost
We can reinstall the drive motor and have it powered up and run it if necessary
This press can be converted from a slant bed to straight up and down

This equipment is located in US