MITSUBISHI 3015NX-60CF-R

Listing description

machine structure: precision rack and pinion with linear z-axis
travel drive method: x,y,z simultaneous 3 axes
control method: x,y, and z simultaneous 3 axis control
x-axis stroke: 125.98"
y-axis stroke: 62.99"
z-axis stroke: 4.7"
maximum work piece size: 120.08" x 60.04"
maximum processing feed rate: 2360 inches per minute
maximum work piece weight: 2050 lbs.
table pass height: 33.5"
rapid travel speed
single axis; 4724 inches per minute
simultaneous: 6680 inches per minute
minimum command input: .001 mm/.0001"
drive motor type: intelligent ac servo
machine unit dimensions: 444.1"l x 94.5" h x 193.8" d
total system weight: 34,836 lbs.
pallet change time: approximately 35 seconds
pallet change weight: 6175 lbs.
pallet changer drive mechanism: chain
installation dimensions: 489.6" x 346.8"
floor space requirement: 1179 sq. ft.
electrical requirements: 208 vac +/- 5%, 3 phase, 60 hz
motion system, cnc controller: 98 kva (total machine usage)
laser resonator: 280 (full load amps)

cnc control specifications:
model: mitsubishi lc20bp2
type: self contained-simple dust proof design
cpu: 64 bit
display unit: 15.0" tft color lcd touch screen
hard disc drive capacity: 10.0 gb
program memory capacity: standard 5000m/approximately 2 mb, number of register

able programs 400
co2 laser control
power control: output power, frequency, duty
operation control: shutter open/close, beam on/off, laser gas change, etc.
processing machine control
drive method: x, y, z (simultaneous control)
position detection method: encoder
minimum command unit: .001mm/.0001"
program input method: usb, computer link, ethernet lan
operation method: memory operation/hd direct operation

laser resonator specifications
model: mitsubishi 60cf-r
excitation method: 3-axis cross flow, sd
control method: power feedback
power stability: +/- 1%
beam mode: low-order (main component tem01)
beam outer diameter: 1.06"
beam divergence: approximately 3.5" or less (total angle)
wave length: 10.6 microns
frequency setting range: 10~3000 %
duty range: 0~100 % of rating
resonator unit dimensions: 131.9" l x 78.1" h x 31.5" wide
resonator unit weight: 6615 lbs.
rated output power (cw): 6000 watts
composition co2:co:n2:he: 8:4:60:28
consumption amount: 4.5 liters per hour
gas sealing time: 24 hours (during rated continuous oscillation)

This equipment is located in US