MITSUBISHI ML-3015LVP(PLUSII)-45CFR-CO2 LASER, MFG:2011

Listing description

machine structure: precision rack and pinion, direct drive
travel drive method: x,y, z simultaneous 3 axes
control method: x,y, z simultaneous 3 axis control
x-axis stoke: 122.05"
y-axis stroke: 61.02"
z-axis stroke: 3.54"
maximum work piece size: 120.08" x 60.04"
maximum processing feed rate: 1180 inches per minute
maximum workpiece weight: 2050 lbs.
table pass height: 33.5"
rapid travel speed
single axis: 3345 inches per minute
simultaneous: 4730 inches per minute
minimum command input: 0.001mm/.0001"
drive motor type: intelligent ac servo
machine unit dimensions: 418.5" l x 90.6" h x 183" w
total system weight: 26,325 lbs.
pallet change time: approximately 25 seconds
pallet changer weight: 4500 lbs.
pallet changer drive mechanism: chain
installation dimensions: 473.4" x 227.7"
floor space requirement: 750 sq. ft.
electrical requirements: 208 vac +/- 5%, 3 phase, 60 hz
motion system, cnc control: 71 kva (total machine usage)
laser resonator: 202 (full load amps)

cnc controller specifications
model: mitsubishi lc20bp2
type: self contained-simple dust proof design (mounted on processing machine)
cpu: 64 bit
display unit: 10.4" tft color lcd touch screen
hard disc drive capacity: 2.0 gb
program memory capacity, standard: 5000m/approximately 2 mb with 400 register

able programs
co2 laser control
power control: output power, frequency duty
operation control: shutter open/close, beam on/off. laser gas change, etc.
processing machine control
drive method: x,y, z (simultaneous control)
position detection: encoder
minimum command unit: .001mm/.0001"
program input method: 3.5" floppy, computer link, ethernet lan
operation method: memory operation, hd direct drive

laser resonator specifications
model: mitsubishi 45cf-r
excitation method: 3-axis cross flow, sd
control method: power feedback
power stability: +/- 1 %
beam mode: low-order (main component tem01)
beam outer diameter: 1.02"
beam divergence: approximately 3.5" or less (total angle)
wave length: 10.6 microns
frequency setting range: 10~3000 hz
duty range: 0~100 % adjustable
output power adjustable range: 0~100% of rating
resonator unit dimensions: 98.4" long x 71.3" high x 31.5" wide
resonator unit weight: 4850 lbs
rated output power (cw): 4500 watts
composition (co2:co:n2:he): 8:4:60:28
consumption amount: 3 liters per hour
gas sealing time: 24 hours during continuous oscillation

please click on link to view videos under power:

https://youtu.be/y8bfdrdiwki

https://youtu.be/7uuamqdhqmk

https://youtu.be/qfvjlefujjg

This equipment is located in US