-
Machinery
Choose from 20,247 used machinery listings
- Auctions
- Sell machines
- Sell complete plants
- What is Kitmondo?
- About us
- Blog
New - 2011
Cutting Time: 8,635 Hours
SPECIFICATIONS:
Swing of Workpiece - Maximum.....................................14.57"/370mm
Swing Over Cross Slide:
- Turret 1.......................................................14.57"/370mm
- Turret 2.......................................................11.81"/300mm
Turning Diameter - Maximum:
- Tool Spindle...................................................14.57"/370mm
- Turret 2.......................................................10.63"/270mm
Turning Length - Maximum.........................................16.69"/424mm
Bar Work Capacity..................................................2.56"/65mm
Travels:
- X-Axis (Tool Spindle)..........................................14.96"/380mm
- Y-Axis (Tool Spindle)....................................+/- 4.13/+/- 105mm
- Z-Axis (Tool Spindle)................18.11" + 6.10"/460mm + 155mm
- B-Axis Rotation Range (Tool Spindle)...........................+/- 120 Deg.
- X-Axis (Turret 2)...............................................6.10"/155mm
- Z-Axis (Turret 2)..............................................24.02"/610mm
Spindle 1:
- Speed - Maximum...................................................6,000 RPM
- Number of Spindle Speed Ranges (Winding Change-Over)......................2
- Type of Spindle Nose...............................................JIS A2-6
- Through-Spindle Hole Diameter....................................2.87"/73mm
- Indexing Increment - Minimum....................................0.0001 Deg.
- Bearing Inner Diameter..........................................4.33"/110mm
- Torque (40%ED/Cont.)......................164.43/116.50 Ft.LbF / 223/15 N m
Spindle 2:
- Speed - Maximum...................................................6,000 RPM
- Number of Spindle Speed Range.............................................1
- Type of Spindle Nose.......................................80" g6 Flat Nose
- Through-Spindle Hole Diameter...................................14.96"/38mm
- Indexing Increment - Minimum....................................0.0001 Deg.
- Bearing Inner Diameter..........................................27.56"/70mm
- Torque (25%ED/Cont.)..........................27.7/16.21 Ft.LbF / 37/22 N m
Tool Spindle (Turret 1):
- Number of Tool Stations...................................................1
- B-Axis Indexing Time................................0.5 Seconds per 90 Deg.
- B-Axis Indexing Increment - Minimum.............................0.0001 Deg.
- Speed - Maximum..................................................20,000 RPM
- Taper Hole of Rotary Tool Spindle..................................Capto C5
- Inner Diameter of Rotary Tool Spindle Bearing....................2.56"/65mm
- Storage Capacity.........................................................76
- Tool Diameter w/Adjacent Tools - Maximum.........................2.76"/70mm
- Tool Diameter w/o Adjacent Tools - Maximum......................5.12"/130mm
- Tool Length w/Tool Diameter Less Than 2.76"/70mm................9.84"/250mm
- Tool Length w/Tool Diameter More Than 2.76"/70mm................8.27"/210mm
- Tool Mass - Maximum...........................................11 Lbs./5 kg.
- Tool Changing Time (Tool-to-Tool)...............................1.2 Seconds
- Torque (15%ED/25%ED/Cont.)..........36.13/27.27/16.22 Ft.LbF / 49/37/22 N m
Turret 2:
- Number of Tool Stations..................................................10
- Indexing Time..................................................0.19 Seconds
- Shank Height for Square Tool.....................................0.79"/20mm
- Shank Diameter for Boring Bar....................................1.26"/32mm
- Rotary Tool Speed - Maximum.......................................6,000 RPM
- Torque (15%ED/Cont.).........................3.54/1.70 Ft.LbF / 4.8/2.3 N m
Feedrate - Rapid Traverse:
- X-Axis (Tool Spindle)...............................1,574.80 IPM / 40 m/min
- Y-Axis (Tool Spindle)...............................1,574.80 IPM / 40 m/min
- Z-Axis (Tool Spindle)...............................1,968.50 IPM / 50 m/min
- X2-Axis (Turret 2)....................................787.40 IPM / 20 m/min
- Z2-Axis (Turret 2)..................................1,181.10 IPM / 30 m/min
- A-Axis (Spindle 2)..................................1,417.32 IPM / 36 m/min
- B-Axis..............................................................100/min
- C-Axis..............................................................250/min
Motors:
- Spindle Drive 1 (40%ED/30 Min/Cont.)....14.66/14.66/10.00 HP / 11/11/7.5 kW
- Spindle Drive 2 (25%ED/Cont.)....................10.00/7.33 HP / 7.5/5.5 kW
- Tool Spindle Drive (25 Min./Cont.).................12.00/7.33 HP / 9/5.5 kW
- Turret 2 Milling Drive Motor (15%ED/Cont.)..........2.01/1.61 HP 1.5/1.2 kW
- Coolant Pump Motor (50Hz).............0.850/1.394 HP x4 / 0.635/1.040 kW x4
- Coolant Pump Motor (60Hz).................0.98/1.62 HP x1 / 0.73/1.21 kW x1
Compressed Air Supply.........118.8 GPM @72.5 PSI / 450 L/Min @ 450 Mpa (ANR)
Coolant Tank Capacity.......................................71.05 GPM / 270 L
Floor Space Required - Catalog.........114.37 W x 106.50 D / 2,905 x 2,705 mm
Machine Height from Floor - Catalog........................102.95" / 2,615 mm
Machine Weight - Catalog...............................19,300 Lbs. / 8,800 kg
Optional Machine Specifications:
- Through-Spindle (Spindle 1) Hole Diameter.......................2.87"/73 mm
- Tool Spindle Speed (Turret 1) - Maximum..........................20,000 RPM
- Tool Storage Capacity....................................................76
- Chip Conveyor (Outside Machine)..........................Hinge Type (Right)
- Oil Skimmer
- Air Blow System...........................................Chuck (Spindle 1)
- Automatic In-Machine Tool Presetter.................Tool Spindle / Turret 2
- Workpiece Conveyor
- External M-Code Output.............................................5M-Codes
- Signal Tower....................................3 Stage (Red, White, Green)
- Simultaneous 5-Axis Control
EQUIPPED WITH:
Mori Seiki MSX-711IV Control
76 Position ATC
Standard Coolant Filtration with Chip Conveyor
CoolJet Hi-Pressure Coolant System
This equipment is located in US
Manufacturer | Mori Seiki |
Model | NT1000/SZM |
Year | 2011 |
Country | USA |
Condition | Good |
Main category | Metalworking Machinery |
Subcategory | CNC Lathe |
ID | P81113012 |
Client type | Machinery dealer |
On Kitmondo since | 2015 |
Number of listings | 0 |
Country | USA |
Employees | 1 - 10 |
Established | 1996 |
Company description |
Need machinery? Check out our inventory page at to see what’s available. Not seeing what you need? The premier used machinery dealers in the U.S., with over 25 years’ active experience buy… read more Need machinery? Check out our inventory page at to see what’s available. Not seeing what you need? The premier used machinery dealers in the U.S., with over 25 years’ active experience buying & selling conventional & CNC metalworking & fabricating machinery & finishing equipment. We have the resources to purchase anything--from one machine tool to an entire facility--and the capabilities to expedite removal with our established network of riggers and transportation companies. Liberty buys directly for inventory; this means we pay immediately upon acceptance of our bids and remove on your schedule. If needed, we also offer brokerage and auction representation services. |
Last activity | Nov. 25, 2022 |