Mori-Seiki SH-8000

Listing description

Manufacturer: Mori-Seiki

Model: SH-8000

Control: Fanuc 18iMA

Condition: Very Good

Code: M0130

Travels:

X-Axis Travel: (Longitudinal Movement of Column): 51.2" - 1,300 mm
Y-Axis Travel: (Vertical Movement of Spindle Head): 47.2" - 1,200 mm
Z-Axis Travel: (Cross Movement of Table): 43.3" - 1,100 mm
Distance from Pallet Surface to Spindle Center: 2.0"- 49.2"
Distance from Table Center to Spindle Gage Plane: 7.9"- 51.2"

Table:

Pallet Working Surface: 31.5" x 31.5"
Maximum Workpiece Swing Diameter: 51.2"
Pallet Loading Capacity: 4,400 Lbs
Maximum Workpiece Height (24 Holes, Pitch (6.2") ): M16 (1/2-13 UNC) Tap
Minimum Table Indexing Angle: 1 degree
Table Indexing Time: 3.4 Sec

Spindle:

Maximum Spindle Speed: 15,000 RPM
Number of Spindle Speed Ranges: 1
Type of Spindle Taper Hole: 7/24 Taper, No. 50
Spindle Bearing Inner Diameter: 4.3"

Feedrate:

Rapid Traverse Rate: 1,653.5 IPM
Feedrate: 0.01-1,653.5 IPM
Jog Feedrate: 0-50 IPM <15 Steps>

ATC:

Type of Tool Shank: CAT 50 V-Flange
Type of Retention Knob: 90 deg. Type
Tool Storage Capacity: 60 Std.
Max. Tool Diameter: (without adjacent tools): 4.9" (12.6")
Max. Tool Length: 19.7"
Max. Tool Weight: 66 Lbs
Method of Tool Selection (shorter route/ random access): Fixed address
Tool Change Time: (Tool-to-Tool): 2.5 Sec
Tool Change Time: (Chip-to-Chip): 6 Sec

APC:

Number of Pallets: 2 Standard
Method of Pallet Change: Turn-Type
Pallet Changing Time: 14 Seconds

Motor:

Spindle Drive Motor: (30 min./cont.): 40/33.5 HP
Feed Motor: (X,Y & Z Axis): 7.9/9.7/9.7 HP
Hydraulic Pump Motor: 3 HP
Coolant Pump Motor: 1.3 x 2 HP

Power Source:

Electrical Power Supply: 86.2 KVA
Compressed Air Supply: 72.5 PSI, 137.3 GPM

Tank Capacity:

Hydraulic Oil Tank Capacity: 10.6 Gal
Lubrication Tank Capacity: .2 Gal. (for Spindle)
Coolant Tank Capacity: 184.8 Gal.

Machine Size:

Machine Height: 147.5"
Floor Space (Actual width under): 12` ft x 22 ft
Weight of Machine: 64,856 Lbs.
Machine Length: 20 ft 6 inches
Machine Width: 143 inches

Equipped With:

Turbo Md. 6586-8055 Rear external chip conveyor with drum type filter for "Fines"
Auto Coupler hydraulic system for fixtures on turret
60 place ATC
15,000 rpm spindle
Coolant thru spindle
48 sets of additional work coordinates
Custom Macro B
Tool Life Management
One degree indexing
Fanuc 18iMA control with MAPPS
Two Signal Light Towers
Manuals included: Installation, Maintenance, Parts, and 2) Electrical Circuit manuals

Standard Acc:

2 Pallet APC (Front Spin Type)(Tapped Pallets)
Table Indexing 1 Degree
Positioning Block for Optional Tooling
60 Tool ATC Magazine
X,Y & Z Axis Direct Scale Feedback
Center Through Conveyor Interface
High Pressure Coolant System <64 PSI>)
Coolant Shower System <64 PSI>
Complete Covers
Safety Door Interlock System
Spindle Oil Cooler
Automatic Power-Off System
Coolant System
Built-in Worklight
Leveling Block
Hand Tools
Synchronized (HIGH SPEED) Tapping
Level I High Speed Machining (Look Ahead Control)
320M <1,050 Ft.> Part Program Storage

Comments:

Recent up grades made in 2013
New way covers for X axis
New ball screws for Y and Z axis
New spindle
Pallet changer rebuilt
New hydraulic pump for Auto Coupler
B axis rebuilt
Condition is excellent
Machine only ran aluminum parts at 6,000 rpm

This equipment is located in US