Mori Seiki SH-8000

Listing description

(1) used mori seiki sh-8000 cnc horizontal machining center
new 2001

specifications:
travel:
x-axis travel:......................................51.2"
y-axis travel:..................................... 47.2"
z-axis travel: .....................................43.3"
distance from pallet surface to spindle center: ... 2.0"- 49.2"
distance from table center to spindle gage plane:...7.9”- 51.2”

table:
pallet working surface:.............................31.5” x 31.5”
maximum workpiece swing diameter:...................51.2”
pallet loading capacity:............................4,400 lbs.
maximum workpiece height:...........................51.2"
table surface configuration: .......................m16 (1/2-13 unc)
tap: ........................24 holes, pitch (6.2”)
minimum table indexing angle:.......................1°
table indexing time:................................3.4 sec

spindle:
maximum spindle speed:..............................15,000 rpm
number of spindle speed ranges:.....................1
type of spindle taper hole:.................... no. 50
spindle bearing inner diameter:.................... 4.3"

feedrate:
rapid traverse rate:................................1,653.5 ipm
feedrate:...........................................1,653.5 ipm
jog feedrate:.......................................0-50 ipm <15 steps>

automatic tool changer:
type of tool shank:................................cat 50 v-flange
type of retention knob:............................ 90° type
tool storage capacity:..............................60 std.
max. tool diameter: (without adjacent tools)........4.9" (12.6")
max. tool length:...................................19.7"
max. tool weight:...................................66 lbs.
method of tool selection:.........................fixed address,shorter route
tool change time: (tool-to-tool)....................2.5 sec.
tool change time: (chip-to-chip)....................6 sec.

automatic pallet changer:
number of pallets:.................................2 standard
method of pallet change:.......................... turn-type
pallet changing time:..............................14 seconds

motor:
spindle drive motor: (30 min./cont.) ..............40/33.5 hp & 309.78 ft/lbs. torque @ 1,200 rpm(6,000 spdl)
feed motor: (x,y & z axis).........................7.9/9.7/9.7 hp
hydraulic pump motor:..............................3 hp
coolant pump motor:................................1.3 x 2 hp

equipped with:
turbo md. 6586-8055 rear external chip conveyor with drum type filter for “fines”
auto coupler hydraulic system for fixtures on turret
60 place atc
15,000 rpm
coolant thru spindle
48 sets of additional work coordinates
custom macro b
tool life management
one degree indexing
fanuc 18ima control with mapps
two signal light towers
manuals included: installation, maintenance, parts, and 2) electrical circuit manuals

This equipment is located in US