MyCronic My 600JP

Listing description

Specification:

Speed and accuracy – solder paste
Jet printing frequency: 720 000 DPH / 1 080 000 DPH (1)
Reference board throughput: (2) 33 000 CPH / 40 500 CPH (1)
Single dot repeatability: 3 (X, Y) (3) 54 μm (0.0021”)
Single dot accuracy: @ Cpk=1.33 (X, Y) (3) 80 μm (0.0031”)
Deposit accuracy: @ Cpk=1.33 (X, Y) QFP100C (4) 33 μm (0.0013”)
Deposit accuracy: @ Cpk=1.33 (X, Y) 0603 (4) 40 μm (0.0016")
Deposit repeatability: 3 (X, Y) QFP100C (4) 19 μm (0.0007”)
Deposit repeatability: 3 (X, Y) 0603 (4) 24 μm (0.0009”)

Dot range – solder paste
Dot diameter, min (5) 0.33 mm (0.013”)
Dot diameter, max 0.52 mm (0.020”)
Dot volume, min (5) 5 nl
Dot volume, max 20 nl
Single dot volume repeatability, 5 nl dots 12,0%
Single dot volume repeatability, 15 nl dots 8,0%
Deposit volume repeatability, QFP100C (6) 4,0%
Deposit volume repeatability, 0603 (6) 3,5%
Gantry type X / Y linear motor
Servo Advanced DSP motion control
Gantry acceleration, max 3 g (30 m/s2)
Position resolution 0.2 μm
Maximum board size 508 x 508 mm (20” x 20”)
Minimum board size 70 x 50 mm (2.7” x 2”)
Board thickness range 0.4 (7) – 6.0 mm (0.016” – 0.24”)
Board edge clearance, top 3 mm (0.12”)
Board edge clearance, bottom 4 mm (0.16”)
Bottom side clearance 20 mm (0.79”)
Board warp / bow / twist, max (8) +/- 2 mm (0.08”)
Board weight, max 5 kg (11 lbs)
Board transport height (SMEMA) 880-975 mm (34.6” – 38.4”)
Factory level programming software – MYCam
Mycronic P&P interface – MYCam Express
Advanced Gerber import – MYCenter
Shared databases

Individual deposit programming – optimizing quality for every solder joint
Quick mode programming – automatch
Handling multi-level boards – editable jetting height
Automatic board stretch and board warpage compensation
Bad board mark handling
Automatic verification of paste type and due date
CAD / Gerber import, all common formats
On-the-spot revisions
No stencils required
Automatic conveyor width adjustment
Low paste waste
Closed system for solder paste – clean process
Operator independent quality

This equipment is located in US