Netzsch Jupiter STA 449

Listing description

System is complete and opperational.

Has software, dongle, manuals, thermal analysis power supply

Info from web:

The STA 449 C Jupiter® is number one among thermo-microbalance based simultaneous TG-DSC because of the match-up of a vacuum-tight instrument design with the successful combination of the highest TG/DSC resolution and unsurpassed long-term stability.
Flexibility for all applications involving organic and inorganic samples is achieved with four exchangeable furnaces for the broad temperature range of -120°C to 1650°C and with a multitude of sample carriers and crucibles.

The vertical design and top-loaded samples ensure total protection of the digital ultra-microbalance, which is on the bottom, through accurate flow of the purge and protective gases in a natural vertical path to the top. This also provides optimal conditions for coupling FTIR and MS gas analysis systems to the heated furnace outlet. The mass flow controllers for 3 gases are already integrated into the base instrument.

The TG sample carriers are always equipped with a thermocouple for direct measurement of the temperature at the sample crucible. There are a number of different thermocouple types to choose from, depending on the application.
Unique is the isolation of the sample carrier from the balance upon automatic opening of the furnace to load a sample. This guarantees reliable mechanical protection of the high-resolution ultra-microbalance and thus a long service life.

From the outset, the STA 449 C Jupiter® was designed for both simultaneous TG and true DSC as well as simultaneous TG with quantitative DTA. The TG sample carriers are user-exchangeable within a matter of seconds, so it is possible to switch between TG and TG-DSC, TG-DSC-Cp or TG-DTA measurements at any time, always with superlative performance.

The STA 449 C Jupiter® is the most powerful and versatile STA system for research and development as well as all material characterization problems for the entire range of organic and inorganic materials.
Specifications
Temperature range: -120°C ... 1650°C
Heating and cooling rates: 0.01 K/min ... 50 K/min (dependent on furnace)
Weighing range: 5000 mg
TG resolution: 0.1 µg
DSC resolution < 1 µW (dependent on sensor)
Atmospheres: inert, oxidizing, reducing, static, dynamic
Integrated mass flow controller for 2 purge gases and 1 protective gas
High vacuum-tight assembly up to 10-4 mbar (10-2 Pa)
c-DTA® for the calculated DTA-signal from TG measurements, ideal for temperature calibration
TG-DSC, TG-DSC-cp and TG-DTA sample carriers for real simultaneous operation
Coupling to FTIR, MS and GC-MS over a heatable adapter (option)
Extension with unique PulseTA® system (option)

This equipment is located in US