The machine ran very briefly, most of the time not used.
The universal device for specialist photographic retailers and photographers is suitable for processing smaller and larger image quantities as well as for production of individual value-added image products. Just like all current Noritsu inkjet models, it can print on one side or both sides. For duplex printing of paper rolls, its output range is from 9 x 13 cm up to the panorama format 30 x 91 cm. Up to 950 images in the 10 x 15 cm format can be output hourly “from a roll” (rated performance at 720 dpi). Paper rolls can be printed on single or dual lane, depending on the format.
Paper rolls are available in common photo paper widths of 102 to 305 mm. Paper feed depends on the width of the paper and can be freely selected from 89 mm to 914 mm in millimetre steps. Thanks to its 30 cm paper infeed, images up to 30 x 91 cm can also be produced with the QSS Green II – up to an impressive 127 per hour at a resolution of 720 dpi (rated performance). Resolution can be selected either at 720 dpi or 1440 dpi.
Sheet paper is available for duplex printing. Adapted to the output products, paper rolls and paper sheets are available in various paper thicknesses and surfaces. Tried-and-tested piezo-inkjet technology with “Dot Size Manipulation (DSM)“ is used as the printing system. It can vary every printing dot in 5 different sizes and can also include paper white as a “sixth option”.
The cartridge can also be swapped during printing. The device is delivered with a sorter with 12 trays, each for 50 pictures up to 152 mm in width, and the LED visual display of job interruption. Data can be transferred from current storage media by the operator at the EZ Controller, by the customer using “High Photo Transfer” terminals in the shop or online thanks to “HPT software”