OEC 9400

Listing description

Description

The OEC 9400 C-Arm system is a versatile entry level unit that is great for a verity of procedures such as Pain Management, General Surgery, Orthopedics, and Vascular Surgeries.
9400 C-Arm X-Ray System

Generator

2.5 kHz High frequency
6.0 kW Full-wave
Up to 120 kVp
Up to 100 mA for radiographic film exposures
Fluoro boost mode up to 20 mA (optional)
Pulsed fluoro mode
Pulsed fluorography mode up to 60 mA (optional)
Full power from outlet:

50 Hz or 60 Hz
100V-15A to 240V-12A

X-Ray Tube

Rotating anode X-ray tube
Focal spots: 0.3 mm and 0.1 mm
Anode heat capacity: 300,000 HU
Anode cooling rate: 70,000 HU/min
Housing heat capacity: 1,250,000 HU Collimator

Collimator

Dual leaf collimation
Minimum beam size < 5 X 5 cm2
Leaves are continuously variable
Remotely controlled from the C-Arm control panel Fluoroscopy Mode

Fluoroscopy Mode

Focal spot: 0.3 mm
kVp range: 40 – 120 kVp
mA range: 0.2 – 5.0 mA normal mode
mA range: Up to 20 mA boost mode (optional)
Auto, manual and pulsed modes
Continuous or One-Shot operation
ABS varies mA, kVp and camera gain
User specific ABS tables

Pulsed Fluoroscopy Mode (optional)

Focal spot: 0.3 mm
kVp range: 40 – 120 kVp
mA range: 0.2 – 5.0 mA
Pulse rate: 1, 2, 4, or 8 pulses per second
Pulse width: 30 or 50 milliseconds
Computer controlled ABS, mA, kVp and camera gain

Pulsed Fluorography Mode (optional)

Focal spot: 0.3 mm
kVp range: 40 – 120 kVp
mA range: Up to 60 mA
Pulse rate: 1, 2, 4, or 8 pulses per second
Pulse width: 35 or 50 millisecondsRadiographic Mode

Radiographic Mode

Focal spot: 0.3 mm or 1.0 mm
Focal spot automatically selected
0.3 mm – mAs range: 1 – 100 mAs
1.0 mm – mAs range: 100 – 3

This equipment is located in US