Okamoto ACC-12-24 DXNCP

Listing description

Specifications:
AGE 2007
NOMINAL GRINDING CAPACITY 12" X 24"
MAXIMUM HEIGHT UNDER 12" WHEEL 13.6"
TABLE SPEED, INFINIITELY VARIABLE 3' TO 82' FPM
MAX LONGITUDINAL TABLE MOVEMENT-MAN 26"
FEED PER HANDWHEEL REVOLUTION 1.85"
MAX SADDLE TRAVEL 9"
INTERMITTENT TRAVERSE SPEED 0.002" TO 0.40" IPM
GRINDING FEED 0.001" TO 40" IPM
RAPID FEED 40" IPM
JOG FEED 0 TO 40" IPM
MANUAL PULSE GENERATOR 0.00001",.0001",.001"
GRINDING FEED 0,001" TO 40" IPM
INTERMITTENT DOWN FEED 0.0001" TO 0.004"
RAPID FEED 40" IPM
JOG FEED 0 TO 40" IPM
MANUAL PULSE GENERATOR 0.00001",.001" ,.001"
SPINDLE MOTOR 5 HP
WHEEL SIZE 12" DIA X 1.5" W X 5" B
SPEED 1000 TO 3600 RPM
APPROX DIMENSIONS FOR OPERATION 107" X 87" X95" H
APPROX WEIGHT 6000 LBS
Equipped with:
FANUC 21MB CNC CONTROL
ASAHI RDU-WL DIAMOND ROTARY DRESSER
OIL TEMPERATURE REGULATOR UNIT
COOLANT SYSTEM WITH MAGNETIC SEPERATOR
MACHIN TOOL ENCLOSURE
MACHINE FEATURES:
CNC Unit (FANUC 21i-MB)
Controlled Axis 2 Axis (2 SIM.)
MIN. Increment Y - axis (Vertical) 0.00001
Z - axis (Saddle) 0.00001
MAX. Programmable Digits ±8 digits
Grind Feed Rate Override 0 - 150%
Rapid Feed Rate Override 0, 25, 50, 100 %
Manual Pulse Feed Increments 0.00001, 0.0001, 0.001
Preparatory Functions M - Codes (2-digits)
Automatic Acceleration/Deceleration
Manual Continuous Feed
Interpolation (Linear / Circular)
Dwell Time
Machine Lock
Skip Function
Stored Pitch Error Compensation
Dry Run
Single Block
Self-Diagnosis Function
Coordinate System Setting
Pocket Calculator Type Decimal Point Programming
Custom Macro B (Option)
Inch / Metric Conversion
Cutter Compensation C
Input / Output Interface RS232C
Part Program Storage Length (Total 262.5 FT)
No. of Registered Programs: 63 Programs
External Message
Machine Features
Built-In Okamoto Conversational Programming System .... developed by Okamoto and based
on our long experience with many different types of grinding applications. This software is based
on the three basic types of grinding ... Form (Plunge), Surface, and Multiple-Step.
The Conversational Programming promotes fast, easy set-up. Saves time...boosts productivity.
When you need more flexibility in grinding, an RS232 Port and PC Card slot
is available for G & M code programming transfer.
Teach Input Programming System ... Operator simply moves the grinding wheel manually
to the grinding start position and using an input key teaches that position to the machine,
then he moves the wheel to the cross reversal position and using the input key, teaches that
position to the machine, etc. He then inputs stock removal, air cut, dressing interval, etc.
and the control automatically calculates total movement and all start and stop points.
Drawing Input Programming System ... Input the actual dimensions from the
workpiece drawing and the control automatically calculates the cycle sequence.
Built-In Conversational Dress Programming ... is based on the three basic types
of dressing menus -- Side, R, V, and SLOTFREE style may also be used utilizing
G and M Code programming. All of the three basic types of dressing menus have
the capability to dress the following forms.
Vertical & Cross Incremental Feed ... with Multipliers of 0.00001/0.0001/0.001.
Automatic Lubrication...All DXNCP Models utilize a proven Gravity Feed Automatic Lubrication System.
Lubrication oil is pumped to an oil reservoir located at the top of the column and is gravity fed
to all guideway surfaces and positioning screws.
Extended Saddle and Table Ways ... Reduced overhand of the saddle and table at
maximum limits provide long effective life of the machine tool and ensure its built-in accuracy.
Double-Walled Column Construction ... H-Shaped guideways with 3 tapered gibs provide the strength
Double Vee Way Table & Saddle Construction ... providing true tracking, greater table load
support, and longer life of the built-in accuracy.

This equipment is located in CA