Okuma LT2000EX-3T3M cnc lathe

Listing description

Okuma LT2000EX-3T3M turning center from 2012
Basic parameters:
Passage over the support Ø400 mm
Maximum turning diameter Ø210 mm
Maximum turning length 130 mm
Distance between spindle faces 990 mm

Rides:
in the XA axis 205 mm
in the XB axis 205 mm
in the XC axis 205 mm
in the ZA axis 400 mm
in the ZB axis 730 mm
in the ZC axis 400 mm
in the W axis (right spindle) 760 mm
in the C1 axis 360 °, stroke: 0.001 °
in the C2 axis 360 °, stroke: 0.001 °

Spindles:
Type of electro-spindle drive
Left spindle revolutions 50 - 6000 rpm
Right spindle revolutions 50 - 6000 rpm
Left spindle tip Ø140 mm (flat)
Right spindle tip Ø140 mm (flat)
Left spindle passage Ø62 mm
Right spindle passage Ø62 mm
Max torque of the left spindle 183 Nm
Max torque of the right spindle 183 Nm

Tool heads:
Number of heads 3
Head type M V16 BMT
Number of tools 16
Tool shaft height 20 mm
Shank diameter Ø32 mm
Spindle speed 45 - 6000 rpm
Max torque 22.5 Nm

Feeds:
Rapid traverse:
in the X axis 30 m / min
in the Z axis 40 m / min
in the W axis 32 m / min
in the C axis 200 rpm

Drives:
Left spindle drive power 11.5 / 7.5 kW (5 min./constant)
Right spindle drive power 11.5 / 7.5 kW (5 min./constant)
Drive power for 5.5 / 3.7 kW tool head spindles (2 min./constant)
Passage drives:
in the XA axis BL 3.5 kW
in the XC BL 3.5 kW axis
in the XB axis BL 2.8 kW
in axis ZA BL 3.5 kW
in the ZB axis BL 3.5 kW
in the ZC axis BL 3.5 kW
Cooling system pump 0.8 kW (x4)

Overall dimensions, weight:
Height 2260 mm
Occupied area of ​​3745 x 2467 mm
Weight 8500 kg

Components:
- coolant supply system (4 x 0.8 kW pump)
- processing space lighting, waterproof fluorescent lamp
- full covers of the machining space
- double foot pedal for opening and closing the handle (x2)
- door lock
- chip tray, side discharge
- machine status lamp (two-color) in place of the status indicator
- foundation shims and leveling screws
- B-1 lubrication monitor
- chuck jaws blow (x2) -
- function to change units inch / metric
- Pitch error compensation for X and Z axes
- detection of the detail falling out of the holder
- opening / closing the handle at the spindle speed
- hooks for carrying the machine
- compliance with the CE and EMC declaration
- IEC standard
- adaptation of the power source to local conditions (CE compliant transformer)
- Load Monitor overload monitor for axis and spindle
- OSP-P200L CNC control with 3D-ME function package

SPECIFICATION OF ADDITIONAL EQUIPMENT of the exposed machine:
- LEFT spindle with increased passage Ø80 mm, A2-6, 50-5000 rpm, max 183 Nm
- through Ø70 mm hydraulic cylinder for the left spindle
- Ø43 mm through hydraulic cylinder for the right spindle
- 6 "three-jaw chuck for the right spindle
- increased power for the left spindle: 22/15 kW
- increased power for the right spindle: 22/15 kW
- bar feeder interface
- graphic interface for external applications - API

This equipment is located in PL