Omax 55100

Listing description

omax waterjet 55100 100 x 55 trav 126x65tble 40k pwr z

Description:
Brand/Model: OMAX "55100"
Machine Type: WATERJET (CNC)
Elect./Voltage: 208 V, 60 Cy, 3 Ph.
FOB/Region: MIDWEST
Year/Cond.: 1999 Good Condition
Value New: $ 191, 000
Price: $ 69, 500

Description:

OMAX 55100 CNC Waterjet Machine
• Work envelope 100" x 55".
• Table size 126" x 65".
• OMAX "P2040" pump, 20 HP and 40, 000 PSI.
• Programmable motorized Z-Axis.
• Precision X- and Y-axis rigidly mounted to the cutting table.
• Scissor-style hard plumbing, component protection against water, dirt, and grit.
• Rapid water level control for quiet and clean submerged cutting.
• Bulk abrasive delivery system transports garnet from the assembly's large hopper into the small hopper located at the Z-axis.
• Galvanized steel material support slats 4" x 1/8".
• Maximum supported material load 250 Lbs/sq.ft.
• Closed loop, digital drives, brushless servo motors, pre-loaded ball screws, recirculating balls, Linear bearings with hardened, precision ground ways.
• Cantilever Y-Axis on bridge X-Axis.
• Accuracy of motion at 70° F at max. traverse velocity 0.003".
• Repeatability 0.002".
• Squareness 0.002" per ft, straightness 0.003" per ft, backlash 0.0007" maximum.
• Speed 180 IPM standard.
• Completes most work below 80 dBA at one meter for submerged cutting.
• Machine dimensions 155" x 94" x 118".
• Weight 8, 000 Lbs.
• Operating Weight 22, 000 Lbs (with water in tank).

Equipped with:

• OMAX "P2040" pump, 20 HP generating 40, 000 PSI.
• Omax CNC control.
• Accustream cutting head.
• Powered Z-axis.
• Abrasive regulator & hopper.

This equipment is located in US