Paxson Slitting Line

Listing description

72" x 9.00" x 50,000

Materials: HRS, CRS, P & O
Max. Coil Width: Entry: 72"
Min. Coil Width: Entry: 12"
Thickness Range: 0.020" - 0.187" (Head #1)
0.075" - 0.375" (Head #2)
Max. Coil Weight: 50,000#
Max. Shear: 45,000 PSI
Max. Yield: 45,000 PSI
Coil I.D.: Entry: 20" - 24"
Exit: 20" & 24"
Max. Coil O.D.: 72"
Line Direction: Right to Left
Mode of Operation: Driven

Consisting of the following:

-Entry Coil Car: L & M
Year: 1999
Mast Type
Floor Mounted
Self Contained Hydraulics
Powered Lift and Traverse
Narrow Coil Retaining Slots
Pendant Control
Cable Reel

-Uncoiler:
Single Mandrel Type
Hydraulic Expansion
"Pumpkin Tooth" Segments
Water Cooled Brake
Slide Base
Feedup Drive
Holddown with Powered Snubber Roll
Cooling System for Brake

-Entry Unit:
Extending Blade Type Peeler
Four (4) Roll Coil Breaker (8" Dia.)
Powered Entry Side Guides
Inspection Table
Powered Exit Side Guides

-Crop Shear:
Down-cut Type
Powered Tamper Roll
Scrap Ramp
Scrap Cart

-Slitter Base:
Powered Entry Pinch Rolls, 10" Dia.
Powered Entry Side Guides
Manually Adjustable Scrap Guides
H & S Gearbox w/62.31:1 ratio, .927 SF
150 HP DC Motor, 1750/2000 RPM, 500V

-Two (2) Slitter Heads:
Crane Removable
Powered Outboard Retraction
Powered Top Arbor Adjust
Slitter Head #1: 9" Dia. Arbors
Slitter Head #2: 12" Dia. Arbors

-Pit Section:
Cross Over Table

-Two (2) Scrap Winders: Pro Eco
Level Wind
Automatic Scrap Dump
0.500" x 1" Capacity per Winder

-Tension Stand:
Drag Type
Recoiler Feed Table

-Recoiler:
20" Dia. Drum w/Risers for 24"
Hydraulic Expansion and Gripper
Hydraulic Pushoff
Overarm Separator
Lufkin Main Gearbox w/7.7:1 ratio
Rated at 649 HP, 5.2 SF
Two (2) Speed H & S Gearbox w/3:1 and 1:1 Ratios, 1.13 SF
150 HP DC Motor, 650/1900 RPM

-Exit Coil Car:
Mast Type
Floor Mounted
Self Contained Hydraulics
Powered Lift and Traverse
Coil Stabilizing Arm
Pendant Control
Cable Reel

-Exit Turnstile:
Two (2) Arms x 50,000# Each Arm
Powered Rotation
Slotted for C-Hook
Provision for a Pulloff Assembly

-Electrical Controls:
AC & DC Control Cabinets
Drives new in 2016

-Control Consoles:
Main Operators Console
Machine Mounted Auxiliary Operators Stations

-Slitter Tooling:
Knives
Rubbers
Spacers
Separator Tooling

-Two (2) Hydraulic Power Units

-Spare Parts for Recoiler Gripper

-Line is Removed and in Storage

This equipment is located in US