PILLARHOUSE Orissa 300

Listing description

Pillarhouse Orissa 300
The Orissa uses a belt driven conveyor transport system to load and unload a PCB. The conveyor positions the board against pre-determined stops where the board is then clamped into position. The board is fluxed with the on-board Inkjet or Ultrasonic fluxer, then soldered using Pillarhouse AP-1 interchangeable nozzle tips or small-dedicated nozzles.

There is also an added advanced process control, top side pre-heat available, which allows the user to pre-heat prior to fluxing and soldering, pre-heat during fluxing or soldering, or pre-heat throughout the soldering process. This optional, user-friendly innovation, offers complete flexibility and guarantees that the board is at the optimum temperature for the soldering process.

An X and Y axis positioning system with a carriage supporting the solder bath and flux head is used to position the solder nozzle and flux head in the X and Y axis. A single Z-axis bath lift mechanism raises the solder bath to the required soldering height position and is accurate to 0 .15mm.

The Orissa is SMEMA compatible and is designed for use with other Pillarhouse modular in-line equipment. Safety interlocks provide operator protection during the process, while an integrated stack light indicates the machine status.

Windows® based PillarCOMM® “Point & Click” programming is included. Program and machine configurations are protected by a customer selectable, multi level password security system. The machine is freely programmable to cater to different board layouts, each solder joint is separately programmable to its own set of required parameters. The programming system employs a component data library enabling quantities of similar joints to use the same soldering data outline. Visually assisted and self teach alignment allows for fast and accurate board programming.

This equipment is located in US