Portable Key Way Mill Machine (Purchased Used and used once)

Listing description

Quality Check on June 20, 2019 - Run motor with speed control, check variable speed, endmill locking screw present, chain clamp assembly components present, cleaned all components, safety devices and labels present and in good condition

- Climax KM4000 Portable Key Way Mill
- Overall length - 18.5 inches [469.9mm]
- Overall width - 14.0 inches [355.6mm]
- Overall height - 13.25 inches [336.6mm]
- Base size - 9.0 x 18.5 inches [228.6 x 469.9mm]
- Slide travel, longitudinal - 7.88 inches [200.2mm]
- Slide travel, transversal - 2.0 inches [50.8mm]
- Vertical travel max - 30.0 inches [76.2mm]

No load variable speed:
- Minimum 350 rpm
- Maximum 675 rpm
- Spindle hole diameter 0.75 inches [19.1mm]
- Maximum end mill diameter 1.25 inches [31.75 mm]
- Maximum shaft diameter standard bar clamp 18.0 inches [457.2 mm]
- Minimum shaft diameter standard bar clamp 8.0 inches [203.2 mm]
- Minimum clamping space required on stub shaft 8.0 inches [203.2 mm]
- obstructed shaft 10.5 inches [266.7 mm]
- (NOTE: The KM4000 can cut keyways within 2.2 inches [55.88mm] of the obstruction)
- Operating weight 195 lbs. 89 kg
- Shipping weight with speed control 250 lbs. 114 kg
- Shipping dimensions 24 x 24 x 19 inches 610 x 610 x 483 mm
- Power, electric: 120V or 230V, 50-60Hz 1.0 Hp 0.75 kW
- Climax KM4000 Portable Key Way Mill

TOOLING (ALL IN PHOTOS)
1 - Operator's Manual
4 - Chain Assembly with swivel + nut
2 - Clamp Casting
1 - Speed Control
1 - Endmill Adapter - 3/4 to 3/8
1 - Endmill Adapter - 3/4 to 5/8
1 - Hex Wrench Set
1 - Hand Crank
1 - 3/4 Inch Endmill
2 - Base Shims (for 4-8 inch shafts)
10 - Screw 1/4 -20 x 3/4 SHCS

This equipment is located in US