Pullmax Z60 3-Roll Angle Bending Roll

Listing description

Capacities Capacities  
5" x 5" x 1/2" Angles - Leg Out to 63" Min. Diameter 5" x 5" x 1/2" Angles - Leg Out to 63" Min. Diameter  
4" x 4" x 5/8" Angles - Leg In to 80" Min. Diameter 4" x 4" x 5/8" Angles - Leg In to 80" Min. Diameter  
1 3/4" x 1 3/4" x 1/4" Smallest Angle - Leg Out to 32" Min. Diameter 1 3/4" x 1 3/4" x 1/4" Smallest Angle - Leg Out to 32" Min. Diameter  
Beams on Flanges: 8" x 5 1/4" to 70" Min. Diameter Beams on Flanges: 8" x 5 1/4" to 70" Min. Diameter 8" x 5 1/4" to 70" Min. Diameter 203.20mm x 5 6.35mm to 1778.00mm Min. Diameter
Channels (Flanges Out): Channels (Flanges Out): 10" x 2 5/8" to 70" Min. Diameter 254.00mm x 2 15.88mm to 1778.00mm Min. Diameter
Flats on Edge: Flats on Edge: 5" x 3/4" to 50" Min. Diameter 127.00mm x 19.05mm to 1270.00mm Min. Diameter
Flats on Flat: Flats on Flat: 8" x 1 1/2" to 40" Min. Diameter 203.20mm x 1 12.70mm to 1016.00mm Min. Diameter
Squares: Squares: 2 3/4" x 2 3/4" to 40" Min. Diameter 2 19.05mm x 2 19.05mm to 1016.00mm Min. Diameter
Standard St. Pipe: Standard St. Pipe: 3" - 30" Min. Diameter 76.20mm - 762.00mm Min. Diameter
Tees Leg In-Leg Out: Tees Leg In-Leg Out: ST5wf 30 Lbs. to 50" Min. Diameter ST5wf13.61 kg. to 1270.00mm Min. Diameter
Bending Force: Bending Force: 46,300 Lb. 46,300 Lb.
Bending Roll Speed: Bending Roll Speed: 7.2 RPM 7.2 RPM

Equipped With

Console Mounted Toggle Switch Operation Console Mounted Toggle Switch Operation
(3) 15 3/4" Bending Rolls (3) 15 19.05mm Bending Rolls
(3) Roll Drive (3) Roll Drive
Hydraulic Adjusted Guide Rolls Hydraulic Adjusted Guide Rolls
Stationary Top Roll Stationary Top Roll
AC Main Motor Drive AC Main Motor Drive
Hydraulic Adjustments to Lower Rolls Hydraulic Adjustments to Lower Rolls
Spare Hydraulic Motor Spare Hydraulic Motor

Dimensions and Weight

10600 Lbs 4807 Kg

This equipment is located in US