THIS PRESS IS NOW ON SALE! The original price was $96,500.00 USD ACT FAST!
Hydraulic Power Corp. Ltd. (Ajax, ON) RHML
4 post Tie-rod, Hydraulics Top Mounted
1000 Tons, Downstroke
48" x 48" Clear Between Posts
48" x 48"
Daylight (no bolsters):
Daylight (bolsters in):
Two, 6" thick each, T-slotted both directions
50 HP & 75 HP Main Hydraulic Pumps
2 Piston pumps; 1 Vane pump,
all @ 1170 RPM
(all made by Vickers)
2 x 3000 psi
1 x 2500 psi
117 GPM (all three pumps combined)
Dual Mains (20"), Dual Pull Backs (8")
Fast Pressing Speed:
43" per minute
Pressing Spd., Full Load: 20.96" per minute
119" per minute
41 Short Tons (82,000 lbs)
48" F-B x 76" L-R
16'6" (198") without oil cooler. (Oil cooler which is presently
mounted on top could be mounted wherever desired)
No Pit, Modern Design, Flush to Floor
All Fabricated Construction
Water Cooled Oil Cooler
Prefill with 2 Speed Pumps Gives Rapid Advance
This press was originally in use by the well-known Massey Ferguson tractor company
in Ontario, Canada and is an ALL-AMERICAN built machine, with ALL American standard
components. While is now has some scoring on the mid-range of the cylinders,
(and could use groove filling/polishing techniques to economically remove scores)
depending on customer needs it has great potential to do your job.
Any press like this, with a 4'x4' clear bed area, and 2' stroke and T-slots and with
no pit can be readily adapted to just about any job within the dimensions.
We can ship it lying down in one piece, fully assembled, on train, boat or truck.
Price . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $96,500 USD