Safan H-BRAKE 170-4100 TS 1 Press brake cnc/nc

Listing description

The Safan H-Brake 170-4100 TS 1 press brake was built in the Netherlands in 2005. The machine has additional equipment options, including light curtains to ensure work safety. The press is also equipped with a hydraulic NSCL I + 80mm punch clamping system and programmed deflection arrow compensation - Crowning (mechanical clamping of the CVB / D T5 die). The bumper is equipped with independently controlled X, R, Z1 and Z2 axles. On the front of the Safan H-Brake 170-4100 machine, movable gauges are mounted on the guides. The deflection arrow compensation and backgauge axes are programmed from the CNC control. To increase the rigidity of the press, the lower beam goes below the floor level.

Additional equipment for the Safan H-Brake 170-4100 TS 1 press brake

- die clamping: mechanical clamp
- deflection arrow compensation: CNC controlled crowning
- CNC controlled rear bumper axes: X, R, Z1 and Z2
- movable, aluminum rules at the front of the machine
- CNC control
- increased stroke by 100mm: 300mm
- security system with a programmable light curtain
- hydraulic upper tool clamping: NSCL I + 80mm

Technical parameters of the Safan H-Brake 170-4100 TS press brake 1

- number of controlled axes: 6 + Crowning (Y1, Y2, X, R, Z1 and Z2)
- maximum pressure: 170 tons (1700 kN)
- maximum bending length: 4100 mm
- top beam travel speed: 200mm / s
- bending speed: 10 mm / s
- return speed: 120 mm / s
- dimension Q: 690 mm
- projection 400 mm
- distance between the body walls: 3600 mm
- maximum stroke: 300 mm
- maximum stroke of the bumper: 600 mm
- main engine power: 11 kW (15 HP)
- engine speed: 1440 rpm
- pump: Voith (IPV 4 / 20-171 31l / min)
- oil tank capacity: 200 l
- maximum working pressure: 345 bar
- minimum operating pressure: 200 bar
- upper position pressure: 180 bar
- maximum height of the machine: 3240 mm
- maximum height with the CNC arm: 3600 mm
- transport height: 2900 mm
- top beam length: 4100 mm
- total length of the machine with covers and curtains: 4850 mm
- width (front to back): 1800 mm
- net weight: 15700 kg
- supply voltage: 3x400V / 50 / 60Hz / N / PE
- cross-section of the power cord: 4m2
- maximum connected power: 11 kW

This equipment is located in PL