Schenk V-2002 Screen printing machine together with oven gas MiniSprint

Listing description

Schenk - Variprint SPIDER V2002 rotary carousel printer Type EX 8/12 ER
with Servo electric rotary drive
an electric drive to lift the screen in relation to the Servo pallet
electric drive of the Servo squeegee carriage

12 stations (pallets)
10 automatic printing mechanisms
Print format: 600 x 850 mm (1100 x 850 mm in double index)
Machine diameter: 5,760 mm
15 pieces of aluminum sandwich pallets, 420 x 700 mm
12 pieces of aluminum sandwich pallets, 550 x 750 mm
12 squeegees 400 mm with rubber 40 x 8 mm, 65/80 0 Shore

Energy demand
Electric: 400V, 50/60 Hz, 16A
Compressed air: 8 bar, approx. 3 m3 / h per printing mechanism

Standard equipment
TOUCHSCREEN 13 "touch display,
Microprocessor control,
6 basic programs properly adapted to printing with inks
plastisol, water and HD printing. Program: heating the pallets! - activation
1 key,
Electric kickback system - allows you to set the distance electronically from the console
between the pallet and the sieve,
HD program - e.g. for high print
Example: when the sieve is lifted, only the squeegee works (any number)
without the pressure of the printing squeegee when returning (e.g. to fill an exposed film
capillary),
after leaving the screen, only the printing squeegee or alternatively two squeegees work,
Eco bag printing function, printing to the bottom edge of the bag!
Or high placement of the motif on a T-shirt, etc.
The function of sweeping the excess paint - the possibility of setting an additional (longer) one
scraping the residual ink behind the printing squeegee (e.g. every 10th grab will occur
longer squeegee travel),
Pallet rotation functions: 1/2 and double index,
Possibility to set a strainer screen: a pallet individually at each printing station,
Mini controls on each printing arm
System of precise reporting of sieves with a scale
Print reporting accuracy +/- 0.025 mm
Pneumatically adjustable squeegee pressure (printing / tightening)
SKIP function for skipping a table top with poorly placed goods
The "Replay" program - allows you to repeatedly dry, for example, one foundation
dryer,
"MIX" program - enables automatic selection of arms, setting from the desktop
distance between the pallet and the sieve programmed in four revolutions,
Fast 3 program with multiple printing.
Example: rotation with paint puff, sieve down + printing if necessary
the reprinting machine does not make a full stroke to raise the screens, but only
small stroke e.g. 3mm to tighten the screen, 1-2-3-Return - transfer printing or printing
large format, the so-called pendulum 1-2-3 return - without full rotation!
Program for printing transfers, the so-called pendulum of 3 pallets (vakuum - optional)
Example: printing on 3 pallets without full rotation,
Pallet rotation direction can be changed (right / left),
Possibility to program each arm with a different printing program,
Raised printing arms: the so-called opening station!

Side sieve loading,
Pneumatic and manual blocking of the sieves,

Manually adjustable angle of the doctor blade,
Print speed: up to 1000 cycles / hour

Additionally: flashline dryer - 3 pcs.

There is an extra sold machine included: MiniSprint - gas oven.

This equipment is located in PL