Schwabendissen S50

Manufacturer Schwabendissen
Model S50
Year -
Country Poland Poland
Condition Good
Main category Woodworking
Subcategory Wood machining center
ID P81222002

Machining center SCHWABENDISSEN S50

- Machines in stock - After the technical review - Very good

Technical parameters

cutting width of 2 200 - 2 600 mm
length of cut 3 700 - 6 700 mm
cutting height 120 mm,
height of 900 mm

Feed speed:

When cutting

Slitting 18 m / min, return 36 m / min
, the transversal cut of 18 m / min, return 18 m / min

When positioning

Slitting 18.3 m / min
Cutting transverse 18.5 / 0.5 m / min


0.3 mm positioning accuracy in
the accuracy of angle measurement of 0.3 mm / m
Cutting accuracy of 0.3 mm / 2m

(Can not be cut with greater accuracy due to the stresses produced in slabs of wood and derived timber)

Main engine of 2 x 11KW (enhanced version)
Blade Diameter 350 mm
one output extraction fi 160
requires a pressure of 6 bar
total power 18 kW

The machine equipped with 2 independent motors drank. A first longitudinal cutting, cutting the second section. Separately engines included on the desktop.

S50 Series is a series of powerful circular saws and machines for cutting boards. Clamps plates hold the workpiece during the cutting of the whole process. Crosscut and longitudinal switched on separate engines. This is the ensure the highest quality and precision cutting angles drank the system is run after the round, hardened guides. Saw is ideal for cutting slabs of wood, plastics and mineral materials. Robust construction is rooted in anti-vibration bed, that guarantee maximum precision. The plate pack is not Transferred during cutting, saw the same goes for the cut.
Saw panel designed for businesses of all sizes. The model has been designed for companies with high Requirements for power consumption

A plate package during cutting is supported by:
1) Pneumatic tensioner front side

2) The pneumatic clamp both sides of the cross-cutting saws

3) the pile guide roller Slitting.

There are 3 ways charging blade

1) Manual (the manual loading plate is aligned to pneumatic beams.)

2) When a mechanical feeder

3) fully Automatically by loading successive longitudinal elements

We add hundreds of new listings every week. Be sure not to miss any Schwabendissen S50 by subscribing to our email updates.

We also send announcements for upcoming auctions for Woodworking.

We hate spam as much as you do