SCM Horizontal Pane

Listing description

PANEL SIZING CENTRE
• Brand: SCM
• Model: SIGMA IMPACT 105 C, CE
• Conditions: Tested and functioning
• Delivery: Ready

Description:
Strong, fiable and versatile sizing centre satisfying the needs of all type of customer: from small manufacturer which searches the most user friendly machine, to the medium industry which works on several shifts or for those that wants to fully automate the working process, up to the big industry which works by batches
Saw carriage and blade run on prismatic guides: Maximum rigidity and perpendicularity of the blade with respect to the stack of panels. Drastic reduction of friction and wearing on the materials at even highest speeds. Maximum stability duration of the linearity of the stroke and the structural characteristics
Pressure beam: The slots in the back side of the pressure beam eliminate the interference with the clamps allowing the complete use of the panels with rear cuts trims at will
Magnetic strip: The reading of the position of the pusher, by means of a magnetic strip, not subject to clearance of mechanical actions, ensure the maximum precision.
Saw carriage: The saw carriage is driven by means of a rack and pinion coupling which gives more fluency in the run and a better cutting quality
Storing space for panels: moving the tables it is possible to create a storing zone of the pieces worked and of the bars outside the cutting line.
Technical information:
• Cut dimensions mm. 4.500 x 4.300
• Main blade diameter mm. 380 - speed 3900 rpm
• Scoring saw diameter mm. 160
• Saw carriage max speed with inverter mm. 6-60

• Pusher speed m/min. 38 max
• Consumption of compressed air NI/1' 300
• Working air pressure bar 7
• Compressed air connection diam. mm. 1/4"
• Air consumption for dust extraction mc/h 6100
• Overall dimensions 7.000 x 8.200 mm.
• Documents: operation and maintenance manual, spare parts catalogue, electrical sheet, software manual, CE declaration of conformity
Optionals:
• Air flotation tables nr. 4
• Pneumatic grippers nr. 6
• Software: Wincut
• Quick and safe saw blade change with pneumatic device

This equipment is located in IT