SCM K 560 TE EDGEBANDER

Listing description

Description

Edgebanding thickness: .4mm to 6mm (.016 to 1/4")
Guillotine capacity: 3mm
Feed speed: 40 and 60 ft/min.
Panel height: 3/8" min to 2-1/8" max.
Minimum panel length: 5-1/2"
Minimum panel width: 2-3/8"
Minimum distance between panels: 20"
Orion 1 Controller with soft touch keypad
Strip feed magazine
Quick change/disconnect Teflon glue pot
Pre-milling station with (2) 2.0 HP motors, to rectify/clean panels already sized
Pressure station with pneumatic driven roller and (2) spring loaded idle rollers
End trimming station with (2) independent 0.50 HP motors mounted on THK guides
Top and bottom trim station composed of (2) independent 0.7 HP motors, as well as three position pneumatics to easily go from thin tape to 3 mm PVC
Profile scraping unit designed to remove knife marks, equipped with pneumatic in/out positioning through controller
Glue scraping unit eliminates any excess glue
Buffing unit consisting of (2) independent 0.25 HP motors, tiltable to 12 degrees
Air requirements: 90 PSI
Dust collection: (2) 3" ports for the premilling station, (2) 2" ports for the top and bottom trim station and (1) 3" port for the 3 mm collection bin for extraction (2,500 CFM required)
Electrical requirements: 51 amps @ 230 Volt 3-Phase
Machine dimensions: 67" W x 158" L x 59" T
Machine weight: 3,450 lbs.

Prices and specifications are subject to change without notice. Dimensions and weights do not include crates or packaging. We measure and weigh each machine and/or crate prior to shipping and will be happy to provide this information to you upon request.

This equipment is located in US