Scm Olimpic K 360 Ert/Hp Edgebander

Listing description

Automatic single sided edgebander designed to be used for edgebanding straight vertical profiles with coiled material (veneer and PVC) and with strips (high-pressure laminate and solid wood) with a maximum thickness of 8 mm.

MACHINE BASE
The machine base is made of a tubular steel structure and is designed to assure maximum stability and accuracy.

ELECTRONIC TOP PRESSURE BEAM
All operating units raise and lower simultaneously when the pressure beam is adjusted. No adjustment is required for the glue roller when changing panel thickness. The pressure beam has two rows of staggered pressure rollers with steel bearings.

PRIMARY SPECIFICATIONS:

0.4 to 6 mm Edgebanding thickness capacity
3 mm Guillotine capacity
3/8" to 2-1/8" Panel thickness capacity
5-1/2" Minimum panel length
2-3/8" Minumum Panel width
20" Minimum distance between panels
Feed speed: 36 FPM

MAJOR FEATURES:

The K360ERT-HP comes equipped with the Maestro Pro Edge controller, a 21" industrial multi touch screen. Comes standard with a Windows operating system. Capable of storing an unlimited number of programs. Monitors statistical data, as well perform diagnostic functions and program functions. 1920 x1080 resolution, intuitive interface. Monitors the number of panels processed, the amount of material applied, the number of hours run, the distance the feed track has turned, etc. Maintenance schedules are monitored for various stations throughout the machine. Swivels 270 degrees for easy access.
Anti-adhesive unit positioned prior to the premilling unit
Infeed Fence is manually adjustable with pneumatic positioning of in and out movement
SGP-E Glue Pot with quick heat up time due to the small glue pot. Reverse rotation of the glue roller for the application of solid wood. Double Thermo Regulation for easy use of both EVA and PUR glue. Color change and glue pot cleaning are able to be completed in minutes, as opposed to hours.
Automatic strip feed magazine
Air cushion table located at machine infeed to help facilitate the loading of panels, especially panels of large dimensions. It includes the extension of the machine entry infeed fence. It is not possible to have the narrow feed option on the machine. Table dimensions are 1,600mm x 600mm.
RT-V Pre-milling station with (2) 2 HP high frequency motors with jumping action controlled through the PLC
3-Roll pressure section (1 large driven roller, 2 idle rollers)
(2) 0.25 HP motors for end trim with pneumatic tilt
R-HP Multi-Edge trimming station composed of (2) independent 0.7 HP motors. Standard with servo positioning to process TWO different radii and infinite thin edges all through the controller
Corner Rounding unit with 0.5 HP motor, designed to carry out the rounding of edges on 3mm material. Comes standard with a diamond cutterhead.
Profile scraping station with pneumatic positioning

This equipment is located in US