Scm Topset Xl Moulder

Listing description

Description

6-head moulder
4.72" x 9.05" capacity (finished section)
Head configuration: Bottom 12 HP, Right 9 HP, Left 9 HP, Top 17 HP, Top 17 HP, Bottom 12 HP
All spindles are 1-13/16" diameter and 6,000 RPM
Pneumatic pressure on all feed wheels
78" infeed straightening bed
6 HP variable speed feed from 20 to 118 FPM
Mechanical digital readouts for vertical and horizontal adjustment of all spindles except 1st bottom head
Powered top beam and top head with simultaneous or independent adjustment - enabling easy rapid set up
"Set Up" rapid setting system on top and left vertical heads to accommodate different tool diameters
Minimum tooling diameter on spindles 2 thru 6: 100 mm
Maximum tooling diameter on spindles 2 thru 6: 220 mm
Minimum/maximum tooling diameter on spindle 1: 120 mm to 140 mm
Pneumatically loaded receding chip breakers for both top heads
2-sector pressure shoe placed after second top horizontal spindle
(2) powered feed rollers on the work table
Pneumatic exclusion from control panel of powered feed wheel unit placed before first bottom head
Left horizontal presser placed before first bottom head with pneumatic exclusion from main control panel
Manual centralized lubrication on rear panel of machine
Manual lubrication pump for worktable
Remote hand held walk around control for ease of setting with feed jog, thickness setting, emergency stop and approx. 15' of cable
Pneumatic raise and lower of cabinet hood via switch at main control panel
Electro mechanical motor brakes for all spindles
Lighted safety enclosure
Power requirements: 120 amps @ 460 volt
Dust extraction requirements: 6,000 CFM @ 5,000 FPM
Machine weight: 11,000 lbs.

Prices and specifications are subject to change without notice. Dimensions and weights do not include crates or packaging. We measure and weigh each machine and/or crate prior to shipping and will be happy to provide this information to you upon request.

This equipment is located in US