Search results for "Kent" 22

Kent TW-32-MV

Year: 2001
Location: USA USA
Technical Specifications: Voltage : 220 volts, 60 Hz, 3-phase 30 Amps service required Year 2001 Fanuc 3 Series AC spindle motor: 70-6000RPM S...

Kent KGS-820AHD

Year: 1998
Location: USA USA
32" x 80" KENT COLUMN TYPE SURFACE GRINDER MODEL: KGS-820AHD NEW: 1998 SPECIFICATIONS: CHUCK SIZE:......................................

Kent KGS-63AHD

Year: 1997
Location: USA USA
12" x 24" Kent Hydraulic Surface Grinder w/ Automatic Incremental Downfeed Model: KGS-63AHD New: April 1997 Capacity Overall table ...

Kent KGS306-AHD

Year: 1988
Location: USA USA
12" X 24" KENT (MADE IN TAIWAN) HYDRAULIC SURFACE GRINDER W/AUTO INCREMENTAL DOWNFEED MODEL: KGS306-AHD NEW: 1988 MAX. GRINDING CAPAC...

Siemens EWSD

Year: -
Location: USA USA
For sale, in house, Siemens EWSD, Taken out of service working. Only cards are for sale. Any serious offers will be considered. Already packed and ...

Kent KGS-410AHD

Year: 1986
Location: USA USA
16" X 40" KENT SURFACE GRINDER (COLUMN TYPE) W/PROGRAMMABLE ELECTRONIC AUTOMATIC DOWNFEED MODEL: KGS-410AHD NEW: 1986 MAX. GRINDING CAP...

Kent KGS-1020AHD, 3-

Year: 2006
Location: USA USA
SPECIFICATIONS: Table Travel............................................................23.6" Saddle Travel.........................................

SFM 3.125? x .134?

Year: -
Location: USA USA
Line Direction: Right to Left Driven Spindle Diameter: 2-1/2? (63.5 mm) Maximum Tube Diameter: 3.125? (79.3 mm) Minimum Tube Diameter: 1? (25.4 mm)...

Kent KGS-84AHD

Year: 2012
Location: USA USA
16" x 32" Kent (Made in Taiwan) Hydraulic Surface Grinder w/Automatic Incremental Downfeed Model: KGS-84AHD New: 2012 Capacity Nominal gr...

Kent 8? x 18? Hydrau

Year: 1980
Location: USA USA
Technical Specifications: 220-440V/3PH/60HZ Table travel: 20" Saddle travel: 10" Working capacity: 8" x 18" Spindle motor: 3 HP Spindle speed: 285...

Kent KGS-84AHD

Year: 2012
Location: USA USA
Specifications: Table size: 16" x 32" Longitudinal table travel: 36 1/4" Cross feed saddle travel: 17 3/4" Distance spindle center to table: 2...

Yoder W20 Tube Mill

Year: -
Location: USA USA
Line Direction: Right to Left Shaft Diameter: 2" Max. Tube Diameter: 2.5" Min. Tube Diameter: 0.5" Max. Wall Thickness: 0.130" Min. Wall Thick...

Kent KGS-63A11D

Year: 1997
Location: USA USA
Year of Manufacture 1997 Overall working area 12” x 24” Longitudinal travel 28” Cross feed saddle travel 13-3/8” Distance spindle center to table 2...

Kent KGS-1020AHD, 3-

Year: 2007
Location: USA USA
SPECIFICATIONS: Table Travel............................................................23.6" Saddle Travel...........................................

Kent KGS-618

Year: -
Location: Canada Canada
Specifications: TABLE SIZE 6" X 18" MAX. GRINDING LENGTH 19.5" MAX. GRINDING WIDTH 8.5" MAX. DISTANCE (SPINDLE TO TABLE) 20.8" SPINDLE MOT...

APV Tube in tube

Year: 1996
Location: USA USA
All stainless steel skidded unit with (2) approximately 50 gallon tanks. (56) tubes. The machine was designed to hold 3 gpm of product for 23 sec...

OKUMA LB10 CNC Turnin

Year: -
Location: USA USA
Offered as is , as removed from service. No warranty or return privilege. Specifications: Max Turn Diameter X Length (Chucker) 5.91” x 4.72” M...

Kent KGS-250AHD

Year: -
Location: Singapore Singapore
Kent KGS-250AHD Surface Grinder Category: Used Grinding Machines Used Kent Surface Grinder Model: KGS-250AHD

Kentwood M509

Year: 2007
Location: USA USA
Type: MOULDERS Manufacturer: KENTWOOD Model: M509 (5 Head) Date of Manufacture: 2007 Used (9 wide inch) 5-head KENTWOOD Moulder with complete...

#SC25 WARNER & SWASEY

Year: -
Location: USA USA
Hole thru Spindle6.25 Chuck Diameter24 Swing Over Bed Ways28 Swing Over Carriage Wing25 Swing Over Cross-Slide Way Block21 Spindle to Turret F...

Kent KGS63

Year: -
Location: Malaysia Malaysia
RECONDITIONED KENT SURFACE GRINDING MACHINE TABLE SIZE : 300 X 600 mm MAX GRINDING SURFACE : 300 X 600 mm MAX DISTANCE CENTER OF SPINDLE TO TABLE :...