SFM 3.125? x .134?

Listing description

Line Direction: Right to Left
Driven Spindle Diameter: 2-1/2? (63.5 mm)
Maximum Tube Diameter: 3.125? (79.3 mm)
Minimum Tube Diameter: 1? (25.4 mm)
Maximum Round Wall Thickness: .134? (3.40 mm)
Maximum Shapes Wall Thickness: .120? (3.17 mm)
Minimum Wall Thickness: .032? (.812 mm)
Single Point Adjustment
Rafted
Welding Speed: 65 – 300 FPM (20 – 90 MPM)

ENTRY LINE:
(1) 10,000 Lb. KENT Double Uncoiler
Maximum Coil O.D.: 72?
(1) KENT Shear & End Welder
(1) KENT #HC-100 Horizontal Accumulator

SFM FORMING MILL:
(1) Entry Guide Roll
(4) Driven Breakdown Stands w/Single Point Adjustment
(3) Driven Fin Stands w/Single Point Adjustment
(7) Idle Side Roll Units

WELDING SECTION:
(1) SAN FENG 300 KW Solid State High Frequency Welder
(1) Seam Guide
(1) 3-Roll Weld Pressure
(1) Double Bead Scarf Remover
(1) Coolant Zone, 20' (6000 mm) Length

SFM SIZING MILL:
(4) Driven Sizing Stands w/Single Point Adjustment
(4) Idle Side Roll Stands
(1) 8-Roll Turkshead Unit

CUT-OFF:
(1) UCG #U-TRAK S3 High Speed Flying Cold Saw

DRIVE SECTION:
(1) Forming Motor: 75 HP / 56 KW AC Motor
(1) Fin Motor: 75 HP / 56 KW AC Motor
(1) Sizing Motor: 100 HP / 75 KW AC Motor

MOTORS:
3 Motor AC Vector Drive System built by UCG

DELIVERY: 28 – 32 Weeks ARPO

This equipment is located in US