Shred-Pax Shred AZ-45

Listing description

This offer is for a SHRED-PAX AZ-45 Low Speed High Torque 40 HP Shredder and 22 Foot INCLINE CONVEYOR

Shredpax AZ45

You will receive:

1 - SHRED-PAX AZ-45 SHREDDER with Several Upgrades

UPGRADES Included:

- This shredder has the upgraded leg base extensions to allow 5 feet of clearance beneath shredder. This upgraded option enables gaylord boxes on a pallet to fit beneath the shredder. The standard height without the extended legs is only 2 ft 9 inch clearance so this upgrade option is a must!

- Safety Gate / Debris Catcher - This shredder has a custom gate welded to the base on all 4 sides to keep you safe while the shredder is in operation and to also catch any flying debris that may occur during the shredding process. The gates open on both sides to allow loading and unloading from either side.

- Electronic Control Box Included and ready to go with no missing parts.

- Breaker / Control Box for Conveyor Hookup

Shredder Specs
- 2 x 20hp 480v , 3 Phase Electric Motors (Total 40 HP)
- 114 inches long / 49 inches wide / 106 inches height
- Cutting chamber is 20 inches x 43 inches
- Hopper opening is 40 inches x 56 inches
- Clearance height beneath shredder 5 feet
- 34 knives 1 1/4 inch
- Approx Weight 6-8000 lbs

1 - Incline Conveyor (approximately 22 ft long and 30 inches wide)

Conveyor Specs
- 22 feet long and 30 inches wide (Belt is 22 feet long and 24 inches wide)
- Approx Weight 1050 lbs
- Baldor 3-phase 2 hp motor (1725 rpm)
- Winsmith 920 Speed Reducer

The shredder and conveyor were just removed from service and run good.

The photos shown are of the actual shredder and conveyor you will receive.

Here are just some of the items this shredder can process and the approximate shred rates:

Hard Drives 2000-3750 lbs per hour
Car Batteries 2000-3750 lbs per hour
Aluminum Cans 2500-6750 lbs per hour
Steel Cans 2500-6750 lbs per hour
Computers 2500-6750 lbs per hour
Printers 2500-6750 lbs per hour
Auto Tires
Wooden Pallets
Rubber
Plastic
Fiberglass
Plastic Barrels
Furniture

This shredder is great for e-waste shredding and processing.

Shipping Information:

This shredder is FOB Sunrise, Florida so you will be responsible for shipping expenses from our warehouse. We will load the shredder and conveyor for you at no cost. This item can be transported on a single drop flatbed trailer for easy side loading and unloading. We can assist you with arranging flatbed transportation if needed.

Payment Information:

Bank Cashiers Check or Wire Transfer required for payment.

This equipment is located in US