Southwestern Industries SWI TRAK 1845-SX

Listing description

Specifications:
Equipped With:

Description

Height of Centers – 9″

Distance Between Centers – 45″

Swing Over Bed – 18.1

Swing Over Saddle Wings – 17″

Swing Over Cross Slide – 9.13″

Cross Slide Travel – 10.6″

Tool Section Max – 1″

Coolant Tank Capacity – 12 Gal.

Width of Bed – 13.4″

Height of Bed – 12.4″

Spindle Nose (Camlock) – D1-6

Spindle Through Hole – 2.36″

Spindle Taper – MT#6

Taper in Reduction Sleeve – MT#4

Spindle Diameter at Front Bearing – 3.35″

Number of Bearings – 2

Spindle Speed Range Low – 80 to 850 RPM

Spindle Speed Range High – 250 to 2500 RPM

Tailstock Quill Travel – 6″

Tailstock Quill Diameter – 2.56″

Tailstock Quill Taper – MT#4

Spindle Motor – 10 HP

Power Requirements, Control – 1/60/110 Volt, 8A

Power Requirements, Machine – 3/60/220 Volt

Amps Full Load Current – 33

Max Rapid Feed X – 100 IPM

Max Rapid Feed Y – 250 IPM

Coolant Pump Motor – 1/8 HP

Spindle Motor Brake – Dynamic Braking

Bedways Hardened and Ground

Dimensions – 94″ x 52″ x 73″

Weight, Approx – 3300 Lbs.

Description

Equipped with:

Prototrak SLX Control

Manual or CNC Operations

Electronic Handwheels and Jogstick

Programmable Spindle Speeds

8″ Set-Tru 3-Jaw Chuck

Quick Change Tool Post

Tailstock

Coolant Pump

Sliding Chip Tray

This equipment is located in US