Speedline Aquastorm 200 (Torrid Zone) In-line Aqueous Cleaning System (2004)

Listing description

Speedline Electrovert Aqueous Cleaning System
In-line Cleaner
Model: Aquastorm 200 (Torrid Zone)
Year: 2004

Prewash Module:
14" (36cm ) section
Vee Jets staggered nozzles, 2 upper and 2 lower spray manifolds
Valve switching to divert pre-wash to drain or wash sump

Heated Recirculating Wash Module:
48" (122cm) section
Vee Jets staggered nozzles, 4 upper and 4 lower spray manifolds
80 Gallon (303 liter) sump tank with slanted bottom for efficient draining
Two (2) 16 kW (total 23 kW) immersion heaters
Over temp safety circuits
Automatic fill and drain brass solenoid valves
Easy access to catch screen, pump inlet filters, float switches, and heaters
Slide out tank collection screen and pump inlet filters
Pre-plumbed to accept Hurricane Jet upgrade

Chemical Isolation (DRAG-OUT) Module:
36" (91 cm) dwell zone

Heated Recirculating Rinse Module:
48" (122 cm) section
Vee Jets staggered nozzles, 4 upper and 4 lower spray manifolds
50 Gallon (189 liter) sump tank with slanted bottom for efficient draining
Two (2) 16 kW (total 23 kW) immersion heaters
Over temp safety circuits
Heavy duty stainless steel tank lid with gasket seal
Automatic fill and drain brass solenoid valves
Easy access to catch screen, pump inlet filters, float switches, and heaters
Slide out tank collection screen and pump inlet filters
Pre-plumbed to accept Hurricane Jet upgrade

Final Rinse Module:
17" (43cm) section
Vee Jets staggered nozzles, 2 upper and 2 lower spray manifolds
Upper and lower stainless steel manifold control valves

Torrid Zone:
90.7" (230.9 cm) Total dryer section
Temperature monitors: 3 via thermocouple sensors, Provides LCD readout on operator control panel
Final dryer module incorporates exit end enclosure: exit end enclosure width (474.5mm or 18.68"), Sound dampening padding and storage compartment
Blower Drying Station #1: 15 HP Direct Drive Blower, 14.158 m3/min @101.6 cm H2O (500 scfm @ 40" H2O), Temp up to 127C (260F)
Blower Drying Station 2A and 2B: 3 HP Direct drive blowers, 2 x 6kW heaters in each convection zone (total of 4), variable output from 14.158 m3/min to 56.63 m3/min @7.62 cm. H2O (500 to 2000 scfm @ 3" H2O), Separate blower fail detect pressure sensors in each zone, separate zone drying temp up to 140 C (300F)

Conveyor Module:
20" (51 cm) width stainless steel mesh belt
Conveyor tentioning with safety cluth
Closed loop conveyor speed control via computer
1/8 HP 90V DC motor

System Controls:
System functions computer controlled
Noise suppression package < 80 dba at the exit end of the machine
Custom operator keypad and multi-line LCD display with LED bar graphs
Temp controls via internal PC and thermocouple sensors
Liquid level tank height sensors dispayed on control panel
Programmable process set point alarms
Emergency stop controls
Motor overload protection on pumps and blowers
High/low water level protection alarms
Auto start 7 day programming timer
Open function keys for future expandability
Emergency condition source identification
Front mounted stainless steel pressure gauges for all wet sections
High temp shut-off switches in wash and dryer sections

Plumbing, frame and enclosures:
UL marked
Stainless Steel plumbing with "Kwik Clamps" for wash, rinse and fill lines
Single point utility connections
1 x 10" exhaist stack
2 x 10" exhaust stacks
Gravity cascade
Triple welded polypropylene liquid tanks
CPVC drain plumbing
Over spray protection on wet modules
Painted cold rolled steel, and stainless steel with tubular steel frame
Scratch inhibiting textured gray polypropylene construction
Hinged tempered glass viewing windows and spash shields
Front and rear removable covers

Power Specifications: 480V, 3 phase, 50/60hz
Machine Dimensions~: 7333mm (287") x 1518mm (60") x 1302mm (51")

This equipment is located in US