Speedline MPM Momentum Elite Screen Printer


Last availability: unknown - check availability

Listing description

Description
Repeatable Printing Quality for High Yields
Momentum is designed and built to be a no-nonsense production machine. Cost-efficient and featuring a modest footprint, it grows with the user; innovative patented features can be added on as needed or retrofitted as the user’s throughput demands grow. Numerous patents protect the Momentum platform, which incorporates tried and true systems and features from other successful MPM printers that were designed prior to Momentum (and still in use today). Momentum’s alignment repeatability is +/-12.5 microns @ 6 sigma, Cpk > 2. Its 6 sigma capability is designed in and independently verified. Wet print accuracy is 20 microns @ 6 sigma, Cpk > 2. Tighter performance tolerances mean higher repeatability with fewer defects.
The Elite is the top-performer, offering the highest throughput and shortest cycle times. It’s configured with a highly-efficient triple track rail system featuring an input buffer, a central processing section, and an output buffer.
The Momentum series is designed with production needs and the needs of the operator in mind. They’re champion performers, meeting the demands of high throughput and accuracy, yet at the same time are easy to learn, easy to use, and offer user-friendly features including built-in wizards in the Benchmark software program that provide direction for all machine functions, utilities, and error recovery.
Programmable Squeegee
Independent, direct motor-driven lead screws for front/rear axes and an integrated compliance routine ensure accurate application of desired force, regardless of variations in squeegee type, length or thickness.
Underside Stencil Wiper
Designed to prevent defects before they happen, this paper over plenum design, with venturi vacuum, patented roller solvent bar delivery system, and full software control, provides precise wetdry wipe transition and exceptional cleaning results. Unlimited wipe configurations, profile capability, and event driven functionality ensure process reliability. The ability to refill solvent without stopping production maximizes uptime.
Specifications
BOARD HANDLING
Maximum Board Size (X x Y): 609.6mm x 508mm (24" x 20")
* Staging Mode with Momentum Elite: 457mm x 508mm (18" x 20")
Minimum Board Size (X x Y): 50.8mm x 50.8mm (2" x 2")
Board Thickness: 0.2mm (0.008") to 5.0mm (0.20"), up to 6.0mm (0.24") without top clamp foils
Maximum Board Weight: 4.5kg (9.92lbs)
Board Edge Clearance: 3.0mm (0.118")
Underside Clearance: 12.7mm (0.5") standard / Configurable for 25.4mm (1.0")
Board Hold-Down: Fixed top clamps, center nest vacuum / Optional EdgeLoc
Board Support Methods: Magnetic pins / Optional: Gel-Flex, vacuum pins, support blocks, patented auto-tooling or Grid-Lok

PRINT PARAMETERS
Maximum Print Area (X x Y): 609.6mm x 508mm (24" x 20")
Print Gap (Snap-off): 0mm to 6.35mm (0" to 0.25")
Print Speed: Up to 305mm/sec (12.0"/sec)
Print Force: 0 to 20kg (0lb to 44 lbs)
Stencil Frame Size: 737mm x 737mm (29" x 29") / Adapters available for smaller sizes

VISION
Vision Field-of-View (FOV): 106.0mm x 8.0mm (0.417" x 0.315")
Fiducial Types: Standard shape fiducials (see SMEMA standards), pad/aperture
Camera System: Single digital camera - MPM patented look up/down vision

PERFORMANCE
Total System Alignment:: ±12.5 microns
Accuracy and Repeatability: (±0.0005") at 6 sigma, Cpk of greater than or equal to 2.0
Wet Print Deposit: ±20 microns
Accuracy and Repeatability: (±0.0008") at 6 sigma, Cpk of greater than or equal to 2.0*

Cycle Time
Momentum Elite: 6 seconds standard

FACILITIES
Power Requirements: 200 to 240 VAC (±10%) single phase @ 50/60Hz, 15 A
Air Supply Requirements: 100 psi at 4 cfm (standard run mode) to 18 cfm (vacuum wipe) (6.89 bar @ 1.9 L/s to 8.5L/s), 12.7 mm (0.5”) diameter line
Height (excluding light tower): 1638.4mm (64.5") at 940mm (37.0") transport height
Machine Depth: 1593.1mm (62.72")
Machine Width: Momentum Elite -> 1675.5mm (65.96")
Minimum Front Clearance: 508mm (20.0")
Minimum Rear Clearance: 508mm (20.0")
Machine Weight: Momentum Elite 899kg (1982lbs)


Please note that this description may have been translated automatically.

Last availability: unknown - check availability

Listing information

Manufacturer Speedline
Model MPM Momentum Elite Screen Printer
Year 2008
Country USA USA
Condition Good
Main category PCB and Semiconductor
Subcategory Other SMT Equipment
ID P90902011

Last availability: unknown - check availability

About the seller

Client type Machinery dealer
On Kitmondo since 2007
Number of listings 51
Country USA USA
Last activity Dec. 2, 2020
Contact Click here