Stigal Dynamic Speed HQ 1500X3000 Cutting machine - Plasma / gas

Listing description

The STIGAL DYNAMIC SPEED HQ 1500X3000 plasma cutter was manufactured in 2013 by the Polish company Stigal. A computer-controlled thermal cutter is designed for cutting out shapes from a sheet of metal. It is equipped with, among others in: CNC G-CODE control, CAD / CAM WRYKRYS software, CEBORA PROF 165 HQC aggregate, or a cover protecting the operator's eyesight. The cutter's cutting width is 1500 mm, length is 3000 mm and the thickness is 20 mm. The machine's torch moves at a speed of 330 mm / s and cuts metal sheets with a maximum thickness of 20 mm. The total weight of the machine is 3 tons.

Technical data of the STIGAL DYNAMIC SPEED HQ 1500X3000 cutter

- cutting length: 3000 mm
- cutting width: 1500 mm
- maximum material thickness: 20 mm
- maximum cutting thickness: 20 mm
- permissible table load: 150 kg / m2
- maximum travel speed: 90 m / min
- type of burner height adjustment: voltage
- speed of movement up / down the torch: 330 mm / s
- torch positioning accuracy: ± 0.05 mm
- suction port: Ø315 mm
- operating temperature range: +5 to +40 degrees C
- maximum air humidity: 90%
- power supply: 400 V; 50 Hz
- power consumption: 12,500 W
- total weight of the machine: 3000 kg

Equipment of the plasma burner DYNAMIC SPEED HQ 1500X3000

- CNC control: G-CODE
- CAD / CAM WRYKRYS software
- intelligent exhaust section control system - ECTS system
- dynamic material detection system (DDM)
- double material piercing system (DPS)
- system of active adjustment of the clamping force of the drive train (ASD)
- vertical anti-collision system (WUA)
- voltage height controller of the plasma torch with an adjustment accuracy of 0.1 mm
- automatic shield against light radiation of the plasma arc and sparks
- plasma aggregate: CEBORA PROF 165 HQC
- segmented extraction table

This equipment is located in PL