Sunnen CK-21-D CYLINDE

Manufacturer Sunnen
Year -
Country USA USA
Condition Good
Main category Metalworking Machinery
Subcategory Other Machine Tools
ID P503202812
Contact us

8'' Dia. 12'' Stroke Sunnen CK-21-D CYLINDER KING HONE, MICROPROCESSOR CONTROL, TOOLING;Reference Number: 153381;Sunnen Model CK-21 Vertical Hone "Computer Controlled For Precision Performance" S/N: 2WI-1136 New: 1997 Specifications: Max. Bore Dia. (With CV Type Tooling - Not Included): 8" Spindle: 4 H.P. Two Speed Ranges - Manually Adjusted Low Range 90-240 RPM Adjustable in 10 RPM Increments Through Operator Interface High Range 250-550 RPM Adjustable in 10 RPM Increments Through Operator Interface Stroker: 3/4 h.p. Strokes per Minute: 40-100 Stroke Length Range: 3/4" to 12" (Note: Stroke speeds exceeding 70 RPM are not recommended for stroke lengths over 6.25". Severe Machine Damage Could Result!!!) Adjustable in 10 SPM Increments from Operator Station. No Belts to Change. Feed System: Max. Operating Torque: 10 FT-LB Feed system: 100% Computer Controlled Max. Feed Rate: 0.030 IN/MIN "Sizeloc" Zero Shutoff Auto Retract at End of Cycle. Auto Rapid at Beginning of Cycle. Spindle Pre-Load (Feed Start Point) Set at Operator Interface. Always the Same Amount. Operator and Cycle Independent for Constant Performance. Two Stage Feed Profiling, Beginning or End of Cycle Feed Reduction. Spark Out Option Tool Selection Menu from Operator Interface Electronically Protected Overload System is Operator Resettable. Backed Up by a Common Shear Pin. No Gears to Replace. Honing Fluid System: Honing Fluid System is Synthetic Coolant Compatible. Check with factor for Filter Recommendations. Longer Life Progressive Cavity Pump Flow Rate- 5 Gal/Min Pullout Sump for Easy Cleaning Canister Operating Pressure Gage for Filter Change Planning and Diagnostics. Auto/Manual Start of Coolant Remote Manual Oil Control Valve. Fully Adjustable Nozzle. Reservoir Holds Max. 63.5 Gallons to 38 Gallons Min. General Requirements: Dry Weight: 3,000 LBS Dimensions: Approx. 86" L x 87" W x 88" H Compressed Air: 80 PSI Maximum Part Weight: 1,500 Lbs. Work Area Envelope: 57" x 35 x32" Elecrics: 220 Volts, 3 Phase, 60 Cycle Equipped With: Tooling Set-Up ** Beautiful Condition & Appearance - Original Paint ** ** Inspect Under Power in our Harriosn, NJ Warehouse **

We add hundreds of new listings every week. Be sure not to miss any Sunnen CK-21-D CYLINDE by subscribing to our email updates.

We also send announcements for upcoming auctions for Metalworking Machinery.

We hate spam as much as you do