Sunnen ML-4000

Listing description

SUNNEN PRECISION POWER STROKING HONING MACHINE

MODEL: ML-4000 NEW: 2008

SPECIFICATIONS:
MANUAL STROKE DIAMETER .................... 0.060" TO 6.500"
POWER STROKE DIAMETER ..................... 0.060 TO 4.000"
AUTOMATIC SIZING DIAMETER ................. 0.125" TO 2.000"
STROKE LENGTH ............................. 0.236" TO 6.700"
SPINDLE SPEEDS ............................ 200 TO 3000 RPM
STROKE RATE ............................... 60 TO 500 SPM (FINE INCREMENTS)
SPINDLE MOTOR ............................. 5.5 HP
STROKER MOTOR ............................. 1.5 HP
PUMP MOTOR ................................ 1/2 HP
COOLANT PUMP .............................. 3 GALLONS PER MINUTE
COOLANT CAPACITY .......................... 32 GALLONS
FLOOR SPACE ............................... 64" X 48" X 75" HIGH
MACHINE WEIGHT PLUS COOLANT CART .......... 1,875 LBS.

EQUIPPED WITH:
FULLY AUTOMATIC CYCLE
AUTOMATIC STONE WEAR COMPENSATOR
FEED REGULATOR SYSTEM
"For special applications, the feed regulator system can be used
to improve stone life or to set the machine to a constant feed rate."
DUAL FEED PRESSURE SYSTEM, ROUGH & FINISH IN ONE OPERATION
MAXIMUM FEED PRESSURE FLEXIBILITY
"Two-stage feed pressure feature, the operator can reduce cycle time
by removing the bulk of the stock at a high feed pressure and ?nishing
at a lower pressure. Pressure settings range from 1 to 16.
The operator selects the stock removal and pressure for each stage.
Maintains accuracy along with improved cycle time."
RIGID MACHINE BASE
ELECTRONIC CONTROL SYSTEM
AUTO POWER STROKING
AUTO SIZING CAPABILITY (MUST PURCHASE PLUGS/ACCESSORIES FROM SUNNEN)
DETACHABLE COOLANT CART SYSTEM
3/60/230-460 ELECTRICS

BROCHURE for the Sunnen ML-4000:
http://www.sunnen.com/graphics/assets/documents/45f1e6b020b9.pdf

K6-205-CH .205 - .210
K8-255-AS 7K .255 - .260 S-255
K8-260-AS 8D .260 - .265 S-260
K8-265-AS 8D .265 - .270 S-265
K8-270-AS 7L .270 - .275 S-270
K8-275-AS 8A .275 - .280 S-275
K8-280-AS 8B .280 - .285 S-280
K8-285-AS 8C .285 - .290 S-285
K8-290-AS 7M .290 - .295 S-290
K8-295-AS 8A .295 - .300 S-295
K8-300-AS 7F .300 - .308 S-300
K10-308-AS 8C .308 - .316 S-308
K10-316-AS 8D .316 - .323 S-316
K10-323-AS 8D .323 - .331 S-323
K10-331-AS 8D .331 - .339 S-331
K10-339-AS 8B .339 - .347 S-339
K10-347-AH 2H .347 - .354 S-347
K10-354-AS 7L .354 - .362 S-354
K10-362-AS 7M .362 - .370
K12-385-AS 8D .385 - .400
K12-416-AS 8B .416 - .432 S-416
K12-447-AS 8D .447 - .463 S-447
K12-479-AS 8D .479 - .495 S-479
K16-495-AS 8D .495 - .526
K16-526-AS 8D .526 - .557 S-526
K16-557-AS 8B .557 - .588 S-557
K16-588-AS 8D .588 - .619 S-588
K20-619-AS 8D .619 - .650 S-619
K20-650-AS 8C .650 - .681 S-650
K20-681-AS 8D .681 - .713 S-681
AK20-775-UA 8C .775 - .806
AK20-806-UB .806 - .838
AK20-838-UB .838 - .869
AK20-900-UC .900 - .931

P-STONE
2G-P28-1500 WD 1.480 - 1.625
4G-P28-1375 WC 1.355 - 1.500
4G-P28-1625 WD 1.605 - 1.750

** EXCEPTIONAL CONDITION & APPEARANCE - ALL ORIGINAL **
** 1,445 HOURS ON METER - WOW! **

This equipment is located in US