Sunnen ML-4000

Listing description

SUNNEN PRECISION POWER STROKING HONING MACHINE

MODEL: ML-4000 NEW: 2008

SPECIFICATIONS:
MANUAL STROKE DIAMETER ......................... 0.060" TO 6.500"
POWER STROKE DIAMETER .......................... 0.060 TO 4.000"
AUTOMATIC SIZING DIAMETER ...................... 0.125" TO 2.000"
STROKE LENGTH .................................. 0.236" TO 6.700"
SPINDLE SPEEDS ................................. 200 TO 3000 RPM
STROKE RATE .................................... 60 TO 500 SPM (FINE INCREMENTS)
SPINDLE MOTOR .................................. 5.5 HP
STROKER MOTOR .................................. 1.5 HP
PUMP MOTOR ..................................... 1/2 HP
COOLANT PUMP ................................... 3 GALLONS PER MINUTE
COOLANT CAPACITY ............................... 32 GALLONS

FLOOR SPACE .................................... 64" X 48" X 75" HIGH
MACHINE WEIGHT PLUS COOLANT CART ............... 1,875 LBS.

EQUIPPED WITH:
FULLY AUTOMATIC CYCLE
AUTOMATIC STONE WEAR COMPENSATOR
FEED REGULATOR SYSTEM
"For special applications, the feed regulator system can be used
to improve stone life or to set the machine to a constant feed rate."
DUAL FEED PRESSURE SYSTEM, ROUGH & FINISH IN ONE OPERATION
MAXIMUM FEED PRESSURE FLEXIBILITY
"Two-stage feed pressure feature, the operator can reduce cycle time
by removing the bulk of the stock at a high feed pressure and ?nishing
at a lower pressure. Pressure settings range from 1 to 16.
The operator selects the stock removal and pressure for each stage.
Maintains accuracy along with improved cycle time."
RIGID MACHINE BASE
ELECTRONIC CONTROL SYSTEM
AUTO POWER STROKING
AUTO SIZING CAPABILITY (MUST PURCHASE PLUGS/ACCESSORIES FROM SUNNEN)
DETACHABLE COOLANT CART SYSTEM
3/60/230-460 ELECTRICS

** EXCEPTIONAL CONDITION & APPEARANCE - ALL ORIGINAL **
** 1,445 HOURS ON METER - WOW! **

This equipment is located in US