TIRE RECYCLING LINE 3 T/h 5 mm.granulate

Listing description

PBV204 TIRE RECYCLING LINE

STARTING PRODUCT : car and small truck tires (suggested 70 cars 30%trucks)FINAL PRODUCT : 4-5 mm. Granulate
HARMONIZED STEEL as a residual product.
Average throughput rate 3-4 Tons/h granulate 4-5 mm.diam.
(throughput rate depends mostly on feeding rate and on the kind of tires)
INSTALLED POWER : 500 kw
DELIVERY TIME : 5-6 months from confirmation
line is entirely constructed using only top quality
materials and components from major DE AT CH FR IT
constructors.
All of our machines are constructed starting from a full steel piece for increased efficiency and durability.
Electric cabinet with PLC and inverter for complete control.
Knives are made in 2711 steel, hardened at 52 hrc and ground.
Cabinet is pre-wired with quick plugging
Complying with Industry 4.0 requirements
The line includes:
Sturdy anti-magnetic structure CONVEYOR BELTS, lined with vulcanized, multi-layer, tear-resistance canvas, fitted with motors from 1,1 to 1,5 kw, variable
peed through PLC setting, up to 40 m/sec., 30 mm. drag paddles.
OVERBELT MAGNETIC SEPARATORS with multi-layer
vulcanized canvas, permanent electro-magnete, attraction force : 100 kg.
LOADING BELT TO 1st SHREDDER
DUAL SHAFT PRIMARY SHREDDER
Shredding surface 1300×1100 mm.
2x 1300 mm long, counter-rotating shafts 10/15 rpm
N.17 knives 75 mm thick, 1 hook
Possible configuration with replaceable knife-tips
n.17 spacers and cleaning combs
Hydraulic motor with axial pistons
N.2 planetary gearboxes
HYDRAULICS
with cooling system, n.2 Linde pumps constant power
regulation HPV 165
outer auxiliary air/oil cooling system 40.000 Kcal/h
n.2 cooling vents
outer filtering system
1.000 lt.tank
n.2 outer manomenters for working pressure
outer manometer to control pump feeding pressure
2 level thermostatics
electric safety device for filter clogging
electric safety system for minimum oil level in the tank
analogic pressure transducer to adjust pressure settings
safety pressure controls with inverted-cycle control
ELECTRIC POWER
n.2 x75 electric motors 380V-50Hz 4 P.+ auxiliary electric motor for outline filetring unit 4 kw 380V 50Hz4P
electric motor for oil cooling vents n.2×0,195 kw 230-400V 50Hz
ELECTRONIC CONTROL
Siemens PLC control
touch-screen to set and check all parameters
electro-hydraulic automatic control of overcharging and inversion-cylce
Approx. weight : 14 Ton
OPTIONAL ADDITIONS (on separate offer) :
hydraulic ram on hopper (with dedicated hydraulic pack)
Automatic timer controlled greasing (through PLC)
Remote control with 10 channels
EXTRACTION BELT + LOADING BELT to second dual shaft
shredder to furtherly reduce size
DUAL SHAFT SHREDDER 1250 x 900 mm.
N.25 knives 50 mm thick, 2 hooks
N.2 x1250 mm shafts
N.2 gearboxes
N.2 x 37 kw, 50 Hz, electric motors
17/21 rpm main shafts speed
overcharge inversion 45A
Approx. weight 4,5 T
EXCTRACTION BELT
1 st METAL SEPARATOR
LOADING BELT to single shaft shredder
SINGLE SHAFT SHREDDER to reduce size to 30 mm.
Shearing surface 1700 x 1000 mm
N.120 knives 20 mm thick, 40×40 mm
Rotor diam. 500 mm.
N.1 gearbox + 1×75 kw motor
Max rotor speed 110 rpm
Belt transmission
30 mm. gridApprox. weight 7 Ton
VIBRATING TABLE + 2nd MAGNETIC SEPARATOR – OVERBELT TYPE
LOADING BELT to granulator
GRANULATOR
Rotor length 1.700 mm.
Rotor diam. 600 mm.
Staggered cutting
N.2 still knives
N.5 rotating knives on 100 mm diam. knives holder
Max 700 rpm
1x 90 kw motor
Belt transmission
5 mm.screen
Approx.weight 3,5 Ton
PNEUMATIC BIG BAG FILLING SYSTEM
Blowing vent, 15 kw, and piping system for extraction of 4-5 mm granulated rubber
Sturdy steel structure holding n.2 x 1Ton big bags
Complete with discharging cyclone
User’s manuals, drawings, CE compliance.

This equipment is located in IT