Used 22 TON TRUMPF TC2020R CNC TURRET PUNCH W/BOSCH CNC CONTROL

Listing description

Technical data:

- work area (x x y): 100" x 50"
- capacity
- maximum sheet thickness: 0.25"
- maximum punching force: 20 tons
- active presser foot: up to 2.5 tons
- maximum workpiece weight: 330 lbs.

Speeds

- x axis: 3543 ipm
- y axis: 2362 ipm
- simultaneous (x and y): 4252 ipm
- c axis: 180 rpm
- maximum stroke rate when punching (e=1 mm): 900 1/min
- maximum stroke rate when marking (approximate): 2,200 1/min
- maximum acceleration
- x axis: 472 in/s2
- y axis: 315 in/s2
- c axis: 200 1/s2

Tools

- linear magazine: 19 tools with 2 clamps
- no. when using multitool: 19-190 tools
- multitool: 5/10 station
- tool change time
- single tool: < 3.5s
- multitool: < 0.9s
- accuracy
- positioning accuracy pa: +/- 0.004 in.
- repeatability ps: +/- 0.001 in.
- programmable parts chute
- maximum part size when using fixed chute: 8 x 8 in.
- space requirements
- including safety: 293 x 254 in.
- average power consumption (approximate): 9 kw
- in standby mode (approximate): 0.7 kw

APPROXIMATELY 39,500 HOUR
EXTREMELY CLEAN - AEROSPACE FACILITY

This equipment is located in US