-
Machinery
Choose from 20,418 used machinery listings
- Auctions
- Sell machines
- Sell complete plants
- What is Kitmondo?
- About us
- Blog
SPECIFICATIONS:
Nominal Force…………275 Ton (250 Metric Ton)
Design Pressure…………305 BAR
Stroke - Variable............1" - 36" (30mm - 900mm)
Stroke – Maximum…………36” (900mm)
Shut Height – Minimum…………12” (300mm)
Bedplate to Slide:
- Stroke Down............12" (300mm)
- Stroke Up............47" (1200mm)
Approach Speed............ 16"/sec (400mm/sec)
Fast Pressing Speed - 1 Pumps............1.75"/sec (45mm/sec)
Fast pressing Speed - 2 Pumps............3.5"/sec (90mm/sec)
Pressing Speed - 1 Pumps............1"/sec (22.5mm/sec)
Pressing Speed - 2 Pumps............2"/sec (45mm/sec)
Return Speed - 1 Pumps............6"/sec (145mm/sec)
Return Speed - 2 Pumps............11"/sec (290mm/sec)
Slide Face Area............79" x 67" (2000mm x 1700mm)
Bedplate Area............95" x 67" (2400mm x 1700mm)
Holes in Bedplate............20" x 20" (500mm x 500mm)
Bedplate Thickness............8" (200mm)
Holes in Bed............To suit Cushions type 3010
Distance Floor to Top Bedplate............36" (910mm)
Tool Clamps............16 off (8 in slide + 8 in B/Plate)
Tool Size - Maximum............40" x 67" (1000mm x 1700mm)
Top Tool Mass - Maximum............ 6 Ton.
Mass of Press............65 Ton.
Electrical Supply............ 380 - 417/3/50
Pneumatic Supply............5.5 BAR
Equipped with:
Upgraded Electrical Controls (AllenBradley) 2015 PLC Programming/part + die storage W/ HDMI interface
Main Pumps Rebuilt 2021
(4) Operator Stations Synchronized to run Front and/or Front/Rear
Pneumatic Die Lifters
Hydraulic Die Clamping
Wintress Shadow Light Curtains
Die Transfer Cart
Special Features:
Hydraulics:
- The central cylinder is a single acting cylinder as is used only for pressing. The two outer cylinders are double acting and used for fast approach pressing and return cycles.
Tool Clamps:
- The slide face and bedplate are machined and fitted with hydraulic tee bolt clamping units: eight in bedplate + eight in slide face. The clamping units are failsafe in that they are spring applied and hydraulically released.
- Spring Loaded Roller roll blocks are fitted in bedplate tee slots to enable tools to be loaded and unloaded from the press.
- The tools are fitted with tee bars top and bottom for clamping and aligning tools in toolspace.
This equipment is located in US
Manufacturer | Rhodes |
Model | 275T |
Year | 2000 |
Country | USA |
Condition | Good |
Main category | Metalworking Machinery |
Subcategory | Metalworking Presses |
ID | P20913367 |
Client type | Machinery dealer |
On Kitmondo since | 2015 |
Number of listings | 0 |
Country | USA |
Employees | 1 - 10 |
Established | 1996 |
Company description |
Need machinery? Check out our inventory page at to see what’s available. Not seeing what you need? The premier used machinery dealers in the U.S., with over 25 years’ active experience buy… read more Need machinery? Check out our inventory page at to see what’s available. Not seeing what you need? The premier used machinery dealers in the U.S., with over 25 years’ active experience buying & selling conventional & CNC metalworking & fabricating machinery & finishing equipment. We have the resources to purchase anything--from one machine tool to an entire facility--and the capabilities to expedite removal with our established network of riggers and transportation companies. Liberty buys directly for inventory; this means we pay immediately upon acceptance of our bids and remove on your schedule. If needed, we also offer brokerage and auction representation services. |
Last activity | Nov. 25, 2022 |