Used Beckman Coulter Avanti J-26 XP Standard High-Speed Floor Centrifuge New

Listing description

- Beckman Coulter Avanti J-26 XP Standard High-Speed Floor Centrifuge
- 120-Day Warranty

Not Included:

- Rotor

Fully Tested and Working Without Issue

After its initial disinfection and inspection, our technicians tested the Avanti J-26 XP with the following results:

- Runs to 25k rpms, refrigeration holds at 10°C. No excessive noise or imbalance. Spins down properly, vacuum works well: PASSED
- Performed inspection, no problems found: PASSED
- Vacuum hose replaced
- Vacuum Sensor hose cleaned
- Rebuilt drive

Specifications:

Manufacturer

Beckman Coulter

Model

Avanti J-26 XP

Mfg. Date

2008

Speed setting range

100 to 26,000 rpm (in 100-rpm increments below 10,000 rpm, 500-rpm increments above 10,000 rpm) or equivalent RCF (in 100 x g increments)

Elutriation speed setting range

0 to 5,000 rpm (in 10-rpm or 10 x g increments)

Speed display

from 0 to 10,000 rpm, display indicates actual rotor speed +/- 10 rpm

from 10,000 to 26,000 rpm, indicates actual rotor speed +/- 0.1%, or equivalent RCF

Time setting range

to 180 min or continuous

Time display

indicates run time remaining (timed run) or elapsed time (hold run)

Temperature setting range

-10 to +40°C (in 1°C increments)

Temperature accuracy

rotor temperature controlled to within +/-2°C of set temperature (after equilibration)

Ambient temperature range

16 to 36°C (60 to 100°F)

Cooling fluid

Refrigerant 404A (HFC)

Acceleration

maximum or slow

Deceleration

maximum, slow, or off

Electrical Specifications

200/208/240V, 50/60Hz, 24A

Dimensions (W x D x H)

28 x 40 x 45.5 in.

This equipment is located in US

Please note that this description may have been translated automatically.