-
Machinery
Choose from 20,094 used machinery listings
- Auctions
- Sell machines
- Sell complete plants
- What is Kitmondo?
- About us
- Blog
Technical Specifications:
- 220volt 3phase 60hz
- Motor: 3HP
- Swing over bed (inches) 11 1/4
- Swing over cross slide (inches) 6 3/4
- Spindle speeds (number) 12
- Spindle speed range (standard) (40 to 1 ratio) rpm 35 to 1200
- Spindle speed range - high rpm 53 to 1800
- Spindle speed range - super high rpm 88 to 3000
- Spindle speed range - low rpm
- Spindle reverse Electrical
- Spindle nose - standard long taper key drive, dia. of hole thru LO, 1-1/2"
- Spindle nose - camlock dia of hole thru D1-3", 1-5/16"
- Spindle- number of bearing 2 Taper Roller 1 Ball
- Spindle - tape r #5 Morse
- Spindle - Size of center #3 Morse
- Headstock - base length on bed (inches) 19-3/8
- THREAD AND FEED RANGE
- Number of thread and feed changes 48
- Range of threads per inch, low standard and high speed ranges 3 to 184
- Range of threads per inch, super high speed range 6 to 368
- Range of feeds = carriage - low, standard and high speed ranges (I.P.R.) .0020 to .1224
- Range of feeds - carriage - super high rpm (I.P.R.) .0010 to .0612
- Range of feeds - cross slide - low, standard and high speed ranges (I.P.R.) .0005 to .0310
- Range of feeds - cross slide - super high rpm (I.P.M.) .0003 to .0155
- Leadscrew (Acme) diameter (inches) and threads for inch 1-1/8-8
- CARRIAGE AND COMPOUND REST
- Cross slide travel (inches) 9
- Top slide travel (inches) 2 3/8
- Solid tool size (inches) 3/8 x 3/4
- Tool hodlers - size of tool shank (inches) and number 3/8 x 7/8 (80)
- Carriage bearing on ways (inches) 18-1/4
- Width of bridge (inches) 6
TAILSTOCK
- Spindle travel (inches) 4 1/2
- Spindle diameter (inches) 1 3/4
- Spindle - size of center #3 Morse
- Tailstock b ody - length on bed (inches) 9 1/4
- Tailstock set-over (either side of center) (inches) 1/2
- Area of tray top (sq. in.) 50
- Overall size: 72" x 30" x 61h
- Estimated weight: 1800lbs
Equipped With:
- Quick production 5C collet attachment
- 3 Jaw Chuck
- Hardened bed ways
- Thread dial
This equipment is located in US
Manufacturer | Cincinnati |
Model | Hydrashift |
Year | 0 |
Country | USA |
Condition | Good |
Main category | Metalworking Machinery |
Subcategory | Lathe |
ID | P206230010 |
Client type | Machinery dealer |
On Kitmondo since | 2015 |
Number of listings | 0 |
Country | USA |
Last activity | June 23, 2022 |