Used excavator HITACHI ZX200-3G

Listing description

specification
Bucket capacity (m³)0.8/0.91
Bucket rod length (mm)291
Working weight of the machine (kg) 19,800
The tonnage (ton) is 20
Manufacturer joint venture/import
Traditional power
Bucket backhoe
Manufacturer joint venture/import
Traditional power
performance
Bucket bar digging force (kN)109
Ground specific pressure (Kpa)44
Rotational speed (rpm)13.3
Walking speed (km/h) High: 0 ~ 5.5km /h Low: 0 ~ 3.6km /h
Climbing ability (%)70
Bucket digging force (kN)151
Maximum traction (kN)203
Rotational torque (Nm)61
Dynamic system
Operating form 4 stroke water cooled direct injection type
Cooling method Water cooling
Rated power (kw/rpm)110/2100
Displacement (L)6.494
Engine model Isuzu AA-6BGIT
Cylinder diameter x stroke (mm)105 mm x 125 mm
Number of cylinders 6
Maximum torque (N.m)550/1600
Hydraulic system
Rotary hydraulic motor type 1 axial plunger motor
Walking hydraulic motor type 2 variable axial plunger motor
Maximum main pump flow (l/min)2 x 194
Working hydraulic oil circuit (Mpa)34.3
Walking hydraulic circuit (Mpa)34.3
Rotary hydraulic circuit (Mpa)30.4
Control hydraulic circuit (Mpa)3.9
Main pump type 2 variable axial piston pump
Pilot pump flow (L/min)32
Oil capacity
Coolant (L)23
Engine oil change (L)25
Hydraulic tank (L)135
Fuel tank (L)360
Hydraulic system (L)240
Body size
Track plate width (mm)600
Track gauge (mm)2200
Counterweight ground clearance (mm)1040
Minimum ground clearance (mm)450
Full cab height (mm)2960
Back end turning radius (mm)2750
Minimum turning radius of front working device (mm)3540
Total transportation length (mm)9620
Total transport width (mm)2860
Total transport height (mm)3130
Maximum height at minimum radius of turn (mm)7660
Scope of operation
Maximum vertical digging depth (mm)6040
Maximum unloading height (mm)6790
Maximum excavation height (mm)9610
Maximum excavation depth (mm)6660
Maximum excavation radius (mm) of the stop surface is 9750
Maximum excavation radius (mm)9910

This equipment is located in CN