Used Haas VF 5 SS Vertical Machining Center

Listing description

TECHNICAL SPECIFICATIONS:

Spindle 12,000 rpm ISO 40
Refrigeration through the 21 Bar spindle
Programmable coolant nozzle
Probe package (part probe, tool probe, probing software)
High speed
Tool change with exchange arm 24 + 1 positions
Screw evacuator

TRAVELS

X 1270 mm.
Y 660 mm.
Z635 mm.
Spindle nose to table (max) 742 mm.
Spindle nose to table (min.) 107 mm.

SPINDLE

Max rating 22.4 kw
Max speed 12000 rpm
Max torque 122 Nm @ 2000 rpm
Drive system Inline direct-drive
Taper CT or BT 40
Bearing lubrification Air/oil injection
Cooling liquid cooled

TABLE

Length 1372 mm.
Width 610 mm.
T-Slot width 16 mm.
T-Slot center distance 80 mm.
Number of std T-Slots

FEEDRATES

Max cutting 21.2 m/min.
Rapids on X 30.5 m/min.
Rapids on Y 30.5 m/min.
Rapids on Z 30.5 m/min.

AXIS MOTORS

Max thrust X 14902 N
Max thrust Y 14902 N
Max thrust Z 14902 N

TOOL CHANGER

Type SMTC
Capacity 26+1
Max tool diameter (full) 64 mm.
Max tool diameter (adjacent empty) 127 mm.
Max tool lenght (from gage line) 406 mm.
Max tool weight 5.4 kg.
Tool to tool (avg) 2.8 s
Chip to chip (avg) 3.6 s

GENERAL

Coolant capacity 360 L

AIR REQUIREMENTS

Air required 113 L/min. @ 6.9 bar
Inline air hose 3/8 in
Coupler (air) 3/8 in
Air pressure min. 5.5 bar

ELECTRICAL SPECIFICATION

Spindle speed 12000 rpm
Drive system inline direct drive
Spindle power 22.4 kw
Input AC voltage (3 phase) low 220 VAC
Full load Amps (3 phase) low 70 A
Input AC Voltage ( 3 phase) High 440 VAC
Full load amps (3 phase) High 35 A

This equipment is located in IT