The New Focus 1600 Series High-Speed Photoreceivers address the needs of the photodetector community in the area of low-noise, high-gain, RF photoreception. These photoreceivers are AC coupled and are capable of driving up to 1 V peak to peak into a 50 Ω load. The minimum bandwidth is 1 GHz with a current gain of 700 V/A. The performance of these units is achieved through the use of solid RF design together with the implementation of some of the latest advances in commercially available amplifier chips. The detector is shielded to avoid RF pickup.
The Model 1601 photoreceiver consists of a silicon PIN photodiode followed by a low-noise amplifier. The Model 1611 photoreceiver consists of an InGaAs PIN photodiode with the same amplifier. The 1601 photodetector has a maximum current of 5 mA and the 1611 photodetector has a maximum current of 10 mA. Therefore, the maximum input optical power is 10 mW for both detectors. Power is delivered through a connector on the back of the unit, and the entire package is shielded to eliminate RF pickup. The AC-coupled 1601 and 1611 incorporate blocking capacitors and a DC bias monitor circuit. The corner frequency of the high-pass filter on the AC-coupled output is approximately 30 kHz; the corner frequency of the low-pass filter on the DC bias monitor output is approximately 20 kHz. The DC bias monitor gain is 10 V/mA.
Power Supply and Cable sold separately.
Low Noise Performance
High Drive Capability
Large Dynamic Range
NEW FOCUS 2033 Large Area Photoreceiver
The 2033 Large Diameter Germanium Optical Receiver allows you to tweak your experiment without worrying about the beam wandering off the detector. Just position the 5.0 mm diameter, 800 to 1750 nm Germanium detector close to where you think the laser beam is and you'll see a signal. No more time-consuming and tedious photoreceiver alignment procedures. This free-space optical receiver has a 8-32 mounting thread and includes an M4 metric adaptor and tool.
Detector Diameter: 5.0 mm
3 dB Bandwidth: 200 kHz, 30 kHz, & 30 kHz
Wavelength Range: 800-1750 nm
Optical Input: Free Space
Detector Material: Germanium
Detector Type: PN
Maximum Conversion Gain: 1x106 V/W
Maximum Transimpedance Gain: 2x103, 105, & 2x106 V/A
NEP: 44 pW/√Hz
Saturation Power: 3 mW
Peak Responsivity: 0.8 A/W
Maximum Power Density: 6 mW/mm2
Output Connector: BNC
Output Impedance: 100 Ω
Power Requirements: Internal 9V battery
Thread Type: 8-32 (M4 Adapter Included)
This equipment is located in MY
|Model||1611, 1601, 2033|
|Main category||Test and Measurement|
|Subcategory||Optical Test Equipment|
|Client type||End User|
|On Kitmondo since||2022|
|Number of listings||35|
|Last activity||March 21, 2023|