-
Machinery
Choose from 20,416 used machinery listings
- Auctions
- Sell machines
- Sell complete plants
- What is Kitmondo?
- About us
- Blog
Patty-O-Matic 330A Commercial 75 lb.
Automatic Patty Forming Machine.
PATTY-O-MATIC 330A Details
Proper Procedure for Operating a Model 330A When the Model 330A is fully assembled with all guards secured in their proper place, put product to be portion molded in the Feed Tray. Push the product through the holes in the Feed Tray Guard into the Hopper opening. DO NOT PUT HANDS OR FINGERS, OR FOREIGN OBJESTS, SUCH AS STOMPERS OR PLUNGERS INTO THE HOPPER. THERE ARE NO STOMPERS OR PLUNGERS NEEDED WHEN USING THIS UNIT, THEREFORE NONE ARE SUPPLIED. After you allow product to drop into Hopper turn the machine on by moving the On/Off switch down towards the on position. The machine may need to cycle a few times to prime the machine with product. As patties are being formed continue to push product through the holes and under the Feed Tray Guard. Patty paper may be added to the machine as needed. The machine can hold up to 1 inch of paper at a time, but no more. As the Mold Plate moves back and forth to form patties, a thin coating of product may accumulate over its surface. This coating may also accumulate on the edges of the Knock Out Cup or on the front of the Hopper and Spacer Plate. This accumulation does occur on all molding machines. It is nothing to be concerned with. There are certain machine settings that may lessen this accumulation. Setting the Ring Pin Pressure Plate for your Patty Size The Purpose of the Pressure Plate is to entrap the amount of product necessary to form your patty. This part is also used in controlling the firmness of your patty. With the Pressure Plate set correctly you will in turn have: - less leakage, oozing, and coating of parts - less kneading of your product - and less strain on your machine. If your patty weight is 8 ounces, keep the ring pin in the storage hole as described in the picture. This will allow the Pressure Plate to move all the way into the Hopper and stop on the welded stop which is the maximum volume setting. If your patty is 4 ounces remove the ring pin from the storage hole and place it in the 4 ounce hole. If you patty weight is to be 6 ounces, place the ring pin in the 6 ounce hole. If you would like to have a tightly packed patty, move the ring pin to a higher than recommended setting for that particular weight.
Comes with: Patty-O-Matic 330A Table stand all stainless steel on caster for easy moving around. Value $ 600.00)
Comes with under acrylic sliding tray. Value $ 450.00
Comes with duplicate former see photo.
Comes with all the parts showing in the photos.
Comes complete and ready for work.
Comes with programmable Patty-O-Matic Conveyor with a belt size 45" x 6"for moving the patties away for packaging.
This conveyor folds for save space, Value $ 2200.00. Pristine condition.
Quickly and efficiently produce high volumes of hamburgers for your butcher shop, or grocery store using the Patty-O-Matic 330A commercial 75 lb. automatic patty forming machine. This commercial quality machine is fully automatic and forms 1200 patties per hour while interleaving paper between the patties for effortless transfer. The standard mold plate size will make 3/4" patties in shapes ranging from square, round, oval, or chop. It can even mold meatballs. Mold plates are easy to change with a convenient arm attachment. The machine dispenses the patties into a perfect stack, making transfer quick and easy. Not only will this take the time out of weighing and sizing meat by hand, but its efficiency is cost-effective and can save money.
It features a 75 lb. capacity feed tray with an exclusive gentle feed and a protective grate for added safety optimal performance. A single ring controls volume and pressure and can be adjusted mid-cycle allowing for quick access to control of product quality. This machine is designed for heavy use with stainless steel cabinetry that is durable and hardworking. The raised design allows for more patties to be stacked at a time, increasing efficiency. The drive shaft has been specifically engineered for long term performance and is powered by a 1/3 hp motor. A built-in circuit breaker protects this unit in the event of a power loss or fluctuation.
Comes with stainless Steel Hupper!
This unit is countertop ready and disassembles for thorough cleaning and sanitation after use. Simply lift off the large plastic hopper and then disassemble the remaining stainless steel components for cleaning. The interlocking control ensures that the unit cannot be started by accident, bringing added safety to your busy meat processing area. This patty forming machine requires an 115V connection.
Overall Dimensions:
Width: 32"
Depth: 24"
Height: 26"
PATTY-O-MATIC 330A SPECS
Quantity
1/Each
Shipping Weight
220 lb. Plus crate 150 lb
Width
32 Inches
Depth
26 Inches
Height
26 Inches
Voltage
115 Volts
Features
Horsepower
1/3 HP
Installation Type
Countertop
Material
Stainless Steel
Output
1,200 / Hour
Patty Thickness
3/4 Inches
Plug Type
NEMA 5-15P
Style
Automatic
Type
Automatic Presses
This equipment is located in US
Manufacturer | Patty-O-Matic |
Model | 330A |
Year | - |
Country | USA |
Condition | Excellent |
Main category | Process and Packaging |
Subcategory | Food & Beverage Equipment |
ID | P30109025 |
Client type | Machinery dealer |
On Kitmondo since | 2020 |
Number of listings | 61 |
Country | USA |
Last activity | Feb. 29, 2024 |