-
Machinery
Choose from 20,247 used machinery listings
- Auctions
- Sell machines
- Sell complete plants
- What is Kitmondo?
- About us
- Blog
Technical specifications:
- Length: 11,050 mm
- Width: 6,000 mm
- Height: 9,500 mm
- Weight: approx. 24,000 kg
- Volume flow of raw gas: 210,000 m³ / h
- Type of dust: wood dust
- Filter medium: polyester needle felt
- Filter area: 1,774 m²
- Filter load: 118.4 m³ / m² h
- Drive motor: 2x 0.25 kW
- Regeneration through: 2 purge air vehicles
- Reg. Fan: 2x 5.5 kW
- Gear motor: 2x 0.12 kW
- Mains voltage: 400 volts, 50 Hz
- Normal sections: 2x 12 pieces
- Injection sections: 2x 4 pieces
- Inlet openings: 6 pieces
- Required Support frames: 4 pieces
• Explosion pressure tested filter housing (galvanized) as a screw construction according to the modular system
• tested explosion pressure relief flaps
• Maintenance and access doors secured with limit switches
• Fire protection thermostats for fire monitoring
• Pressure monitoring by pressure transmitter
• Inlet sections with metal dividers in the raw air area,
• Inlet openings with non-return valves
• automatic and material-friendly low-pressure
• Purge air regeneration with radial fan with three-phase motor
• Purge air trolley drive with gear motor and towing device
for the connection cables
• Clean air room accessible
• Clean air openings prepared for the connection of weather protection hoods or return air ducts
• Dry extinguishing line (galvanized steel pipe) with dust-protected extinguishing nozzles, fire brigade C-coupling, dirt trap and blind cover
• Supply and display device with 2 limit value contacts for control panel installation (for pressure monitor)
• Fixed ladder with back protection including platform with railing (galvanized)
• Discharge device in the trough with drive shaft, deflection shafts and reduction gears, conveyor chain with screwed-on carriers, and rotation monitoring
• discharge funnel
- Fan 1 type RV 56-710/1015, volume flow 35100 m³/h, motor power 55 kW,
- Fan 2 type RV 50-630/1010, volume flow 30100 m³/h, motor power 45 kW,
- Fan 3 type RV 50-630/1005, volume flow 26000 m³/h, motor power 45 kW,
- Fan 4 type RV 50-630/1020, volume flow 29500 m³/h, motor power 55 kW,
- Fan 5 type RV 63-800/990, volume flow 39000 m³/h, motor power 75 kW,
- Fan 6 type RV 63-800/1000, volume flow 44500 m³/h, motor power 75 kW,
This equipment is located in PL
Manufacturer | Rippert |
Model | 124 RX 342 |
Year | 2006 |
Country | Poland |
Condition | Good |
Main category | Woodworking |
Subcategory | Other woodworking equipment |
ID | P11217008 |
Client type | Machinery dealer |
On Kitmondo since | 2020 |
Number of listings | 16 |
Country | Poland |
Last activity | March 29, 2024 |