-
Machinery
Choose from 20,415 used machinery listings
- Auctions
- Sell machines
- Sell complete plants
- What is Kitmondo?
- About us
- Blog
Year 2001 & RE-INSTALLED
Brand KAMPF
Qty. 1 Second-hand slitting line
Mfc. Kampf Built
Material Processed Al. Alloys 1145, 1100, 3003, 7072 and 8111 Temper
Strip Width 635 - 1753 mm (25" - 69") Thickness
Slitting Width 15.8 mm - 1169 mm (0.6" - 46") Max. 40 Cuts Plus Edge Trim
According to Kampf, this Line will run Can Lid Stock 0.93 mm (0.037") and
"O Temper" Dead Soft Aluminum at 2.06 mm (0.081") with Knife Modifications.
Line Speed Max 800 m/min. (2600 Ft/min.) depending on material type, thickness, etc.
Consisting of the Following
Unwind Reels Coil OD
Spool Size I.D./O.D./Length
325 x 406 x 1676 mm (12.812" x 16" x 66") – 304.8 x 406 x 698.5 mm (12"x16"x27.50")
Unwind and Coil Stands to be designed to accept future
Spool length of 1930.4 mm (76")
Rewind Reels
Slitting Width 15.8 mm - 1169 mm (0.6" - 46") Max. 40 Cuts Plus Edge Trim
Reels Diameter O.D. Max. 1829 mm (72") O.D. Min.
Depending on Material Type, Thickness, etc.
Spool/Core I.D 152, 254, 304, 406 mm (6, 10, 12, 16") Fiber Cores (Cardboard)
Slitting System Scissors Cut
Edge Trim Min./Max. 12.7 - 50.8 mm Per Side (0.5" - 2.0" Per Side)
Slit Width Tolerance #ОШИБКА!
Acceleration/Deceleration Vo - V Max. in approx. 80 S
Instantaneous Stop V Max - Vo in approx. 40 S
Emergency Stop V Max - Vo in approx. 10 S
Winding Tension/Unwind Max. 12.650 N
Winding Tension/Rewind 1 318 - 6328 N/25% Taper Tension at Outer Diameter
Winding Tension/Rewind 2 318 - 8438 N/25% Taper Tension at Outer Diameter
Elongation Unit (Stretcher) Capability 1.5 - 3.0% with a Target of 2.0%
Machine Design Drive side on the right, as seen in material running direction.
Voltage 480 V + 10%-20% AC-3 Ph. - 60 Hz +/- 2% Control Voltage
Total Supply Power Value approx. 700 kVA
Air Continuous Pressure >/- 5,5 Bar >/- 77 Psi Consumption approx.
Water Flow 1.5 M3/H 53 Cu Ft/H
Main Machine
Drive Side on the right Unwind with Stepped Expanding Heads Stretch Stand
Two Slitting Cassettes Pusher Plates on Rewinds Drives, Motors and Sps from Siemens
Siemens Programming Unit with Modem and Programs
Winding Shafts 2 Rewind Shafts – 152 mm (6") 2 Rewind Shafts – 254 mm (10")
2 Rewind Shafts – 305 mm (12") 2 Rewind Shafts – 406 mm (16")
Handling for Unwind Side including
Coil Car with Fixed Saddle Core Roller Table with Core Deposit
Two Coil Deposit Stand Non-Driven (Spools 1676, 1800 & 1930 mm (66", 72", 76"))
Empty Spool Roller Table with Spool Deposit
Handling for Rewind Side including
2 Finish Roll Transport Cars Vacuum Hose and Maintenance Platform
Edge Trim Suction, Chopper, Transport and Air-Separator, Diverter Gate,
This equipment is located in DE
Manufacturer | Kampf |
Model | N/A |
Year | 2001 |
Country | Germany |
Condition | Good |
Main category | Process and Packaging |
Subcategory | Cutters/grinders/slitters |
ID | P30303077 |
Client type | Machinery dealer |
On Kitmondo since | 2007 |
Number of listings | 35 |
Country | Germany |
Employees | 11 - 50 |
Established | 2003 |
Last activity | May 30, 2023 |