Used Sony HDC-4300 4K/UHD Fiber Studio Camera

Listing description

This camera can handle 4K,HD and super slow motion.
The HDC-4300’s real 4K imagers capture at four times the resolution of HD.
In HD shooting, this can be used to achieve extreme high-speed image capture at a maximum of 479.52/400 fps.
In 4K shooting, a maximum of 119.88/100 fps can be achieved.

Specifications

General:
Power requirements AC 240 V, 1.4 A (max.), DC 180 V, 1.0 A (max.), DC 12 V, 7 A (max.)
Operating temperature -20°C to +45°C (-4°F to +113°F)
Storage temperature -20°C to +60°C (-4°F to +140°F)
Mass Approx. 5.0 kg (11 lb 0.37 oz) (unit only)

Camera section
Pickup device 3-chip 2/3-inch type CMOS
Spectrum system F1.4 prism
Built-in filters ND: 1 : CLEAR, 2：1/4ND, 3：1/8ND, 4：1/16ND, 5：1/64ND / CC: A : CROSS, B：3200K, C：4300K, D：6300K
Sensitivity F8.0 (2000 lx, 89.9% reflection)
Signal-to-noise ratio -62 dB (HD/59.94i)
Horizontal resolution 2000 TV lines (at center) in 4K, 5% or higher modulation

Input/output connectors
BPU Optical/electrical multi-connector (1)
Audio input (CH1, CH2)

XLR-type 3-pin, female (1 each)
For MIC: -60 dBu (can be set to a value up to –20 dBu using the menu or from the HDCU2000/2500), balanced
For LINE: 0 dBu, balanced
Mic input XLR-type 3-pin, female (x 1)
Return control 6-pin (x1)
Prompter/Genlock BNC (x1), 1 Vp-p, 75 Ω
Prompter 2 BNC (x1), 1 Vp-p, 75 Ω
DC input XLR-type 4-pin (x1), DC 10.5 V to 17 V
DC output

4-pin (x1), DC 10.5 V to 17 V, 0.5 A (max.) / 2-pin (x1), DC 10.5 V to 17 V, 2.5 A (max.)
(Limitations may apply, depending on the load and input conditions.)
Test out BNC (x1)
SDI (1, 2) BNC (1 each)
SDI Monitor BNC (x1)
Earphone Stereo mini jack (x1)
Tracker 10-pin (x1)
Crane 12-pin (x1)
Intercom (1, 2) XLR-type 5-pin, female (1 each)
Remote 8-pin (x1)
Network trunk RJ-45 8-pin (x1)
Lens 12-pin (x1)
Viewfinder 20-pin (x1)
USB USB 2.0, Type A, 4-pin (x1)
Supplied accessories Operation manual (1), Cable clamp belt (1set), Number plates (1set), Screws (+B3x8) (2)

This equipment is located in GB