Vertical Liquid Silicone Injection Molding Machine_KTVS Series

Listing description

Features

i. Horrnt oil-pressure device ensures the tooling works accurately.
ii. Applicabe to lower buildings as it only covers small area and savee space.
iii. Low work platform will be convenient for taking products out and changing molds.
iv. Sliding board design, and the cooling water system ensures the sliding board moving fast enough with any difficulties.

Specifications
1. INJECTION UNIT
SPECIFICATION UNIT VALUE
Screw Stroke mm 210
Screw Diameter mm 45 50 55
Theoretical Injection Volume g 258 319 386
Max.Injection Pressure Mpa 1179 955 789
Injection rate cm³/s 230 280 340
Injection speed mm/s 112
Screw Speed Rotation rpm 0-300
Nozzle Out From Platents mm 50

2. CLAMPING UNIT
SPECIFICATION UNIT VALUE
Clamping Force kN(tf) 1470(150)
Clamping Stroke mm 300
Min.Mold Tickness mm 250
Max.Opening mm 550(600)
(L*W)Distance Between Tie Bars mm 740*360
(L*W)Max.Mold Size mm 600*650
(L*W)Platen/Slide Size mm 1470*660
Ejection Distance mm 100
Ejection Force kN(tf) 42(4.3)

3. OTHERS
SPECIFICATION UNIT VALUE
System Presure Mpa 13.7(140)
Oil Tank Capacity L 300
Moto Power kw 18.5
Mold Heat Power kw 18
Machine Dimesions(L*W*H) mm 2550*2442*3180(3885)
Machine Weight t 8.2

Whole process vacuum high-pressure transport
Rigid metering system: the proportions are two-component silicone regular proportion like: 1:1;10:1;100:2 and so on

4. Color Paste Transporting System
material addition adopts the method of A+B+ color paste simultaneous transport, accurate and reliable;
48 consecutive hours of production without any interruption;
After the static initial mixing, the injection machine feeding screw is mixed dynamically.
Solid color silicone products, translucent silicone products will have better effect.
No injection marks, no traces of stirring unevenly, no color difference between products.

5. Automatic cleaning system
The latest development of machine automatic cleaning system;
It solves the problem of easy solidification of mixer and screw after stop
It is more economical, more reliable and less time consuming than the traditional method of filling with a single component of silicone.
The mixer, screw and nozzle can be cleaned synchronously with one key, and the whole process takes about 3 minutes.
Each cleaning loss of silicone is 0.5-0.8kg (subject to the size of screw rod)

6. Automatic balancing system
AB automatic balancing system is is automatically adjusted by the machine, Monitor proportion changes in real time and adjust accordingly in time.
The conveyance accuracy of double components AB is 0.5~1%, and the repeat accuracy is 0.5%.

This equipment is located in CN