-
Machinery
Choose from 20,415 used machinery listings
- Auctions
- Sell machines
- Sell complete plants
- What is Kitmondo?
- About us
- Blog
Glue and tape application on big and small shaped panels
Equipped with glue pot with 1 Kg capacity
INCLUDES glue storage hopper for larger adhesive volume with timed sequence selection for replenishing reservoir
(2) Rollers to copy the shape of the piece
Glue application amount is adjusted via a knob
Automatic guillotine for coiled material up to 3 mm x 45 mm
PLC to set the length and the cut of the tape (by means of an encoder) for open and closed pieces.
Laser for easy programming of the cut for closed pieces with no need of measuring the piece
On/Off automatic feeder of the panel
Raisable working table for small panels
Utilizes (2) 800 Watt heating elements with electronic temperature control via thermo-regulator
Trimming station with pneumatic tilting, to allow edgebanding of big pieces
Trimming unit with (2) 0.5 Kw 15000 RPM high frequency motors with up/down and front copiers and pneumatic cylinder to lift the motors approaching the pieces to be trimmed
Front copier external adjustment of the trimming unit
(2) Brazed cutters
Raisable working table for small panels
Reinforced arm with vacuum table to hold large panels
TECHNICAL DATA:
Edge Coil Thickness: 0.5 mm to 3 mm (0.5 or thicker thin tape ONLY with proper Low Temp Adhesive)
Work piece min: 200 mm dia.
Work piece max: 2400 mm dia.
Work piece Thickness: 10 to 60 mm (Note: Max. is 45 mm with 3 mm edgebanding - Min. 12 mm for trim station clearance)
Edgeband Thickness: 0.5 mm/.020" to 1 mm for panels up to 60mm thick, 2 mm for panels up to 60 mm thick, 3 mm for panels up to 45 mm thick
Minimum Outside Radius: 30 mm (Note: Based on quality/type of edge tape)
Minimum Inside Radius: 250 mm
Feed (Rotation) Speed: 5 m/min
Dust extraction port: 1 port at 80mm for Trimming unit
Air Requirement: 6 bar (90 psi)
Machine Dimensions: 83" x 62" x 62"H
Machine weight: Approx 1,500 lbs.
Comments:
Excellent Condition - Low Hours!
This equipment is located in US
Manufacturer | Vitap |
Model | Eclipse |
Year | 2015 |
Country | USA |
Condition | Good |
Main category | Woodworking |
Subcategory | Edgebander |
ID | P90321123 |
Client type | Machinery dealer |
On Kitmondo since | 2009 |
Number of listings | 8 |
Country | USA |
Employees | 11 - 50 |
Established | 1966 |
Last activity | July 4, 2023 |