-
Machinery
Choose from 20,411 used machinery listings
- Auctions
- Sell machines
- Sell complete plants
- What is Kitmondo?
- About us
- Blog
WADKIN GA 170 EIGHT HEAD FEED THRU MOULDER
180mm x 120mm capacity with eight heads
Specifications
7-1/8" x 4-3/4" capacity
First and las spindles are 40mm diameter. All others are 45mm diameter
Individual brake motors to all heads
Mechanical digital readouts for horizontal and vertical adjustments on all spindles except first bottom
First bottom spindle includes edge referencing cutter head for positive straightening/feeding throughout the machine length
6’ 6” (78”) long infeed table
Manual Waxalit bed lubrication pump
Hour meter
All standard feed roller covers
Dust hoods to all heads
Both top heads equipped with true radial chipbreakers, hydrocheck damping built in.
Machine wired for 380 volts, 3 phase, 50 cycle operation currently
Unit can run directly on 460/3/60 power with approx. 18% increase in spindle speeds (7500 to 8850 RPM’s).
Transformer required (approx. 85 KVA’s) if unit to be run on 230/3/60
Head sequence and power as follows:
1st bottom head 5.5 HP 6000 RPM speed
Right side head 10 HP 7500 RPM speed
Left side head 10 HP 7500 RPM speed
1st top head 15 HP 7500 RPM speed
2nd bottom head 10 HP 7500 RPM speed
2nd top head 10 HP 7500 RPM speed
3rd bottom head 7.5 HP 7500 RPM speed
Universal head 7.5 HP 7500 RPM speed
Application
All standard moulder work
This equipment is located in US
Manufacturer | Wadkin |
Model | GA 170 |
Year | 1994 |
Country | USA |
Condition | Good |
Main category | Woodworking |
Subcategory | Moulder |
ID | P90311021 |
Client type | Machinery dealer |
On Kitmondo since | 2011 |
Number of listings | 0 |
Country | USA |
Last activity | March 14, 2019 |